Introduction
EN series large ceiling-type air cooler is mainly fitted with
large-size fans motors with a diameter above 710mm to meet the
requirements of high cooling capacity or large cold storage.This
series of products has the following characteristics:
●Casing:High-quality galvanized steel plate sprayed with powder
coating (silver gray RA19006),with desirable corrosion
resistance;both the side plates and the outer water tray plate are
designed with hinged structure, which is convenient to operate;
●The side sheet of the heat exchanger is supported by aluminum
plate to prevent the copper tube from contacting the steel plate
and effectively protect the copper tube;
●Double drain trays design: The outer water tray is designed with
edge structure with angle, which makes the water drain smoothly
without any dead angle; the inner water tray is designed with sink
structure made of aluminum plate, and the condensed water or
defrost water is directly discharged into the drainage outlet of
the outer water tray through the inner water tray;
●There are floor supports for easy installation;
●Coil:φ15 copper tubes with a square arrangement,low heat transfer
temperature difference,low dry food consumption and slow frosting
speed of fins;
●Corrugated aluminum sheet made of hydrophilic aluminum foil, with
the sheet spacing of 4.0mm, 6.0mm, 9.0mm and 12.0mm to meet the
requirements of different temperatures and humidity;
●Fan: 6-pole external rotor fan with large diameter; fan
specifications: φ710, φ800 and φ910,product series of different
specifications,giving users more choices;
●Defrosting:The electric defrosting is adopted in the standard
manner,and the stainless steel heating tubes are distributed in the
coil fins and inner water plates plates,which can bring about
desirable defrosting effect; the steam defrosting can be adopted as
required by the customer.
●The IP65 waterproof junction box and waterproof connectors are
used, with better waterproofing; the fan and the heating pipe are
wired separately, which can lead to high reliability;
●The outlet of the air cooler is equipped with a needle valve,
which is convenient for users to test the pressure;
●It is subjected to strict pressure test at the pressure of 23bar;
●The expansion valves, heating band of fan tube and wind deflector
can be pre-installed according to customer's needs;
●It is compatible with R404A, R507A, R448A, R449A, R134a, R22 and
other refrigerants.
Do you attend exhibition?
Each year we will attend domestic national and foreign
exhibition,also we will support our agent to attend
exhibition,welcome to join us.
Why choose us
Professional:28 years focus one thing-refrigeration equipments
Material we use sufficient
Certificate:CE, ISO, and cetiifcate of producing special pressure
equipment
Projects reference?
FAQ
1, Q:Where is your factory address?
A:We are factory and located in refrigeration equipment producing
base Shengzhou,Zhejiang province.
2, Q: What is your package?
A: Our package comply to custom require not include original wood.
3, Q:What is your MOQ?
A: Ordinary products can order from 1 set.
4, Q: Can you offer sample?
A: Yes,we can offer sample.and cost and delivery at your charge.
5, Q:I can't find products on your list?
A: Please contact me directly.
6,Q:How can i confirm your factory?
A: We have third party verified document of Bureau Veritas
report,you can download in company page or leave me message to get.
