Electronic Protective Silicone Gel HN-6607 | Temperature & Moisture
Resistant
Product Overview for Electronic Silicone Gel:
HN-6607 silicone gel provides comprehensive "armor-like" protection
for electronic assemblies. It effectively resists moisture, dust,
salt spray, and other environmental factors while maintaining
stable performance over a wide temperature range, significantly
extending the service life and reliability of electronic devices.
Product Performance for Electronic Silicone Gel:
- Electrical Properties: Excellent dielectric insulation over wide
temp/humidity range.
- Physical Properties: Ultra-soft, buffers mechanical and thermal
stress.
- Environmental Resistance: Good moisture, aging, and ozone
resistance.
- Temperature Range: Approx. -50°C to +150°C long-term.
Product Highlights for Electronic Silicone Gel:
- ✅ Full Environmental Protection: Excellent moisture, dust, and
salt spray resistance.
- ✅ Superior Thermal Stability: Withstands thermal cycling, stable
performance.
- ✅ Reliable Electrical Protection: High insulation strength
prevents short circuits.
- ✅ Extends Service Life: Protects core components, enhancing
product reliability.
Product Applications for Electronic Silicone Gel:
- Potting for outdoor electronics (e.g., GPS trackers, weather
stations)
- Electronics in marine or high-humidity industrial environments
- Electronic modules near automotive engine bays
- High-reliability power supplies and inverters
Operation Guide for Electronic Silicone Gel:
1. Ensure components are clean, dry, and free of grease/oxides.
2. Pour the uniformly mixed (1:1) compound to fully cover or pot
the areas needing protection.
3. Cure at 120°C for 20-30 minutes to form a durable, soft
protective layer.
Precautions for Electronic Silicone Gel:
- Pre-heat and dry components that may condense moisture or are
cold before potting to prevent trapping water.
Packaging & Storage for Electronic Silicone Gel:
- Packaging: 25 kg per set (25 kg pail of A + 25kg pail of B)
- Storage: Keep in a sealed container in a cool, dry place below
25°C.
- Shelf Life: 6 months (below 25°C).
- Transportation: Classified as non-hazardous goods; can be
transported as general chemicals.
FAQ for Electronic Silicone Gel:
1. Q: What is the long-term operating temperature range?
A: Approximately -50°C to +150°C continuously, with short-term
tolerance for higher temperatures.
2. Q: Can a potted component be repaired? Can the gel be removed?
A: Yes. The cured gel is elastic and soft, allowing careful, bulk
removal by hand or tool for component replacement and repotting.
3. Q: Does it adhere to plastic enclosures like ABS, PC?
A: Adhesion varies by plastic type and surface. Adhesion to most
plastics is moderate. Mechanical locking features (clips, grooves)
and adhesion testing are recommended.
4. Q: What is its thermal conductivity? Can it dissipate heat?
A: HN-6607 is a standard electrical insulator with low thermal
conductivity (~0.2 W/m·K). It is for insulation, not heat
dissipation. Use our thermal conductive gels for heat management.
5. Q: Is it RoHS compliant?
A: Yes, it complies with RoHS. Relevant test reports are available.
