1:1 Mix Ratio Silicone Gel HN-6607 | Easy Proportioning | Reduce
Waste
Product Overview for Electronic Silicone Gel:
HN-6607 features a thoughtfully designed 1:1 weight mix ratio,
greatly simplifying the weighing process and reducing curing
failures and material waste caused by ratio errors. This product
ensures excellent performance while enhancing application
convenience and reliability.
Product Performance for Electronic Silicone Gel:
- Mix Ratio: A:B = 1:1 (by weight)
- Mixed Viscosity: 800–1500 cps
- Pot Life (25°C): 2 hours
- Curing Condition: 20-30 minutes at 120°C
- Hardness After Curing: 0–10 Shore A
Product Highlights for Electronic Silicone Gel:
- ✅ Simple Proportioning: 1:1 ratio, easy to remember and operate,
reduces errors.
- ✅ Easy Mixing: Easy to mix uniformly, ensures curing consistency.
- ✅ Reduces Waste: Accurate ratio prevents material waste, lowers
cost.
- ✅ Excellent Overall Performance: Combines softness, insulation,
and sealing.
Product Applications for Electronic Silicone Gel:
- Small/medium batch production suitable for manual mixing
- R&D and prototyping
- Field repair and maintenance
- Automated dispensing requiring high ratio accuracy
Operation Guide for Electronic Silicone Gel:
1. Simply weigh equal parts of Components A and B.
2. Mix thoroughly for at least 2-3 minutes until uniform, with no
streaks or color variation.
3. Proceed with potting.
4. Cure at 120°C for 20-30 minutes.
Precautions for Electronic Silicone Gel:
- Ensure accurate weighing tools, especially for manual operations.
- The 1:1 ratio facilitates easier pumping and control in automated
equipment, improving dispensing accuracy and efficiency.
Packaging & Storage for Electronic Silicone Gel:
- Packaging: 40 kg per set (20 kg pail of A + 20 kg pail of B)
- Storage: Keep in a sealed container in a cool, dry place below
25°C.
- Shelf Life: 6 months (below 25°C).
- Transportation: Classified as non-hazardous goods; can be
transported as general chemicals.
FAQ for Electronic Silicone Gel:
1. Q: Is the 1:1 ratio by volume?
A: No, it is a weight ratio. Due to slight density differences
(A:1.0-1.12, B:0.98-1.02), volume mixing will cause inaccuracies
and affect curing.
2. Q: Will a slight ratio error prevent curing?
A: Addition-cure silicones are sensitive to ratio. Significant
deviation (e.g., >5%) can prevent complete curing. Precise
weighing is crucial.
3. Q: Are small trial packages available?
A: Yes, please contact our sales team for samples or trial sizes.
4. Q: Can it be used to pot components with bare aluminum shells?
A: Yes, but perform a compatibility test first to ensure no adverse
reactions (e.g., bubbling, inhibition).
5. Q: Is it re-coatable? Can a second layer be applied after the
first cures?
A: Yes, after the first layer is fully cured, a second layer
adheres well with good interlayer adhesion.
