Rubber Hose Wear Resistant High Temperature Reliable Long Lasting
Description
The Hongruntong Fuel Hose Pipe is specifically engineered to
provide high-performance fuel transfer in demanding marine and
industrial applications. Constructed from premium synthetic rubber
and reinforced with multiple layers of high-tensile textile and
stainless steel braiding, the hose offers exceptional durability,
pressure tolerance, and chemical resistance. Its inner tube is
designed to withstand diesel, gasoline, and biodiesel fuels,
maintaining leak-proof integrity even under continuous operation.
The outer layer is formulated for resistance to UV exposure, ozone,
saltwater, and mechanical abrasion, ensuring long-lasting
performance in challenging environments such as ports, offshore
platforms, and shipboard decks. Its flexibility allows smooth
routing around tight bends, reducing installation time and
preventing kinks that could impede fuel flow or cause premature
wear.
Each hose is rigorously tested according to ISO 1825, SAE J1527, EN
1360, and other international marine standards. Burst pressure,
vacuum integrity, chemical compatibility, and abrasion resistance
are verified for every production batch. The hoses are available in
various diameters, lengths, and pressure ratings, and can be fitted
with camlock, flange, or threaded couplings, providing versatile
compatibility with marine fuel systems.
With its combination of strength, flexibility, chemical resistance,
and environmental protection, the Hongruntong Fuel Hose Pipe
ensures reliable and safe fuel transfer across a wide range of
maritime operations, from port bunkering to offshore refueling.
Case Study
In 2023, a Singapore-based oil terminal operator faced operational
challenges with its aging fleet of fuel hoses. Frequent failures
due to mechanical abrasion, UV degradation, and chemical permeation
caused costly downtime and posed safety risks. Hongruntong Marine
was engaged to supply a comprehensive hose solution capable of
withstanding the terminal’s demanding conditions.
The project involved replacing over 500 meters of existing hoses
with HRT-FP450 series hoses, featuring reinforced inner tubes,
braided reinforcement layers, and abrasion-resistant outer covers.
Each hose was fitted with stainless steel camlock couplings to
allow rapid connection and disconnection during fueling operations.
During installation, hoses were routed across complex piping
networks, including sharp bends and vertical runs. Their
flexibility allowed easy handling without kinking, while
maintaining consistent internal pressure for safe and efficient
fuel transfer. Post-installation, hydrostatic and vacuum testing
confirmed compliance with international standards, and chemical
resistance trials verified compatibility with diesel and biodiesel
blends.
Within six months, the terminal reported a 50% reduction in
maintenance incidents, improved operational efficiency, and zero
fuel leaks. Terminal engineers noted the hoses retained their
elasticity and protective qualities even under constant sunlight
and saltwater exposure. This successful deployment led to
additional orders for offshore fueling vessels, demonstrating the
reliability, durability, and adaptability of Hongruntong Fuel Hose
Pipes in critical marine fuel systems.
Specifications
Place of Origin | Beijing, China |
Processing Service | Moulding, Cutting |
Brand Name | Hongruntong Marine |
Material | Synthetic Rubber |
Product Name | Fuel Hose Pipe |
Color | Black |
Feature | Durable |
Size | 1/4"~2" |
Length | 100m |
MOQ | 1 |
Logo | Custom Logo |
Sample | Free |
Quality | High Quality |
| Item Code | I.D | O.D | W.P | B.P | L |
| inch | mm | mm | bar | psi | bar | psi | m |
| HMFHP-1 | 3/16" | 5 | 12 | 20 | 300 | 60 | 900 | 100 |
| HMFHP-2 | 1/4" | 6 | 13 | 20 | 300 | 60 | 900 | 100 |
| HMFHP-3 | 5/16" | 8 | 13 | 20 | 300 | 60 | 900 | 100 |
| HMFHP-4 | 3/8" | 10 | 17 | 20 | 300 | 60 | 900 | 100 |
| HMFHP-5 | 1/2" | 13 | 22 | 20 | 300 | 60 | 900 | 100 |
| HMFHP-6 | 5/8" | 16 | 25 | 20 | 300 | 60 | 900 | 50 |
| HMFHP-7 | 3/4" | 19 | 29 | 20 | 300 | 60 | 900 | 50 |
| HMFHP-8 | 1" | 25 | 36 | 20 | 300 | 60 | 900 | 50 |
| HMFHP-9 | 1-1/4" | 32 | 43 | 10 | 100 | 30 | 450 | 50 |
| HMFHP-10 | 1-1/2" | 38 | 50 | 10 | 100 | 30 | 450 | 50 |
Key Features
Advanced Multi Layer Material Composition
Unlike standard hoses, Hongruntong Fuel Hose Pipes feature a
multi-component inner layer system that combines NBR or FKM rubber
with a specialized fuel-resistant polymer blend. This structure not
only resists fuel permeation but also minimizes chemical
degradation from long-term exposure to biofuels and aromatic
hydrocarbons. The multi-layer construction ensures superior
dimensional stability under pressure fluctuations, preventing
micro-cracks and deformation even after prolonged operation in
harsh marine environments.
High Abrasion and Mechanical Strength
The outer cover is reinforced with proprietary anti-abrasion
compounds, allowing the hose to withstand heavy contact with deck
machinery, sharp edges, and repeated dragging over surfaces without
compromising structural integrity. The hose also resists cutting,
tearing, and compressive forces, making it suitable for rugged port
or offshore environments where physical stress is common. The
reinforced sheath also provides protection against accidental
impacts and mechanical fatigue.
Enhanced Heat and Cold Resistance
Hongruntong Fuel Hose Pipes are engineered to perform reliably
across a wider temperature spectrum than conventional hoses. They
maintain flexibility down to -50°C in cold climates, preventing
brittleness, while remaining stable and resistant to softening up
to +120°C, even under continuous high-temperature fuel flow. This
ensures consistent internal pressure and flow rate, critical for
both high-speed bunkering operations and sensitive shipboard fuel
supply systems.
Integrated Safety and Monitoring Features
Some versions of the hoses are designed with embedded conductive
layers to safely dissipate static electricity during fuel transfer,
reducing the risk of ignition. Additionally, optional built-in
colored tracer layers allow for visual inspection of hose integrity
and wear, providing operators with an early warning system for
maintenance. These safety-oriented design elements enhance
operational reliability, minimize environmental risk, and improve
compliance with stringent maritime safety regulations.
Applications
Port and Terminal Fueling Systems
Ideal for delivering fuel from storage tanks to bunkering stations,
ensuring safe, leak-free, and efficient operations. The hoses’
flexibility allows easy deployment across docks and complex piping
layouts.
Shipboard Fuel Transfer Lines
Used to connect fuel storage tanks, day tanks, and engine systems
on vessels, providing reliable operation under vibration, movement,
and mechanical stress.
Offshore and Service Vessels
Suitable for fuel delivery on offshore platforms, tugboats, and
supply vessels, resisting saltwater, UV exposure, and fluctuating
temperatures while maintaining consistent flow.
Why Choose Hongruntong Marine
Certified Marine Quality
All hoses are manufactured under ISO 9001 standards and meet ISO
1825, SAE J1527, EN 1360, and classification society approvals such
as DNV and ABS. Each batch undergoes hydrostatic, chemical, and
abrasion testing to ensure compliance and reliability.
Advanced Manufacturing and Testing Facilities
State-of-the-art extrusion, braiding, and vulcanization processes
ensure precision control of hose dimensions, pressure ratings, and
material properties. Rigorous testing for burst, vacuum, and
conductivity guarantees top-quality performance.
Engineering Support and Custom Solutions
Hongruntong provides full engineering support, including system
design, hose selection, and end fitting recommendations. Hoses can
be customized in length, diameter, pressure class, and fittings to
match unique client requirements.
Proven Global Performance
Hongruntong hoses are deployed in over 50 international ports and
aboard hundreds of vessels, demonstrating their durability,
reliability, and safety in real-world marine fuel operations.
FAQ
1. Which fuels can this hose transfer?
Diesel, gasoline, biodiesel, and light fuel oils.
2. What is the maximum operating temperature?
Up to 100°C for continuous operation, with cold flexibility down to
-40°C.
3. Are these hoses leak-proof and resistant to kinks?
Yes, engineered with an optimized bending radius and seamless
construction for leak-free performance.
4. Can the hose be customized for length and fittings?
Yes, available in multiple diameters, lengths, and couplings,
including camlock, flange, and threaded types.
5. What certifications do Hongruntong hoses have?
ISO 1825, SAE J1527, EN 1360, and approvals from classification
societies such as DNV and ABS.
