0.4kw-160kw VFD VSD AC Drive Frequency Inverter Factory With 18
Months Warranty
ZONCN T200 Inverter Introduction
ZONCN T200 series vfd inverter stands out with versatile control
and robust performance, tailored for diverse industrial needs. Its
core advantage lies in multi-mode control: V/F, sensorless flux
vector (SFVC), and closed-loop vector (CLVC) options, enabling
precise motor regulation for induction and PMS motors alike .
This vfd inverter delivers impressive dynamic performance: G-type
models achieve 0.5Hz/150% start torque (SFVC), while P-type offers
0.5Hz/100%, with a 1:100 speed range and ±0.5% stability—ideal for
precision tasks like robotics or packaging . Frequency flexibility
(0-600Hz vector, 0-3200Hz V/F) and 0.01Hz digital resolution
further enhance its adaptability .
Durability is another strength. The vfd inverter features
auto-adjusting carrier frequency (0.5-16kHz) based on load,
reducing energy waste and heat . Overload protection (G-type:
150%/60s, 180%/3s; P-type: 120%/60s, 150%/3s) and STO fail-safe
torque termination safeguard equipment and operators .
Integration is seamless with its multi-protocol suite (Modbus,
EtherCAT, PROFINET, CANopen) and RS485, syncing easily with PLCs or
IoT platforms . Built-in EMC filters cut electrical noise and
installation costs, while the RJ45 keyboard port allows rugged,
on-the-fly configuration .
Functional richness adds value: 16 preset speeds, S-curve ramps,
auto voltage regulation (AVR), and DC braking (0-100s) meet varied
operational demands . Compact design with IP20 protection fits
tight spaces, making this vfd inverter a reliable, efficient choice
for automation and retrofits.
| Technology Features | |
| ITEM | T200 |
| Basic function | Maximum frequency | 0～600.00Hz |
| Carrier frequency | 0.5kHz～16kHz |
| The carrier frequency can be automatically adjusted based on the
load features. |
| Input frequency resolution | Digital setting:0.01Hz |
| Analog setting: maximum frequency×0.025% |
| Control mode | Voltage/Frequency control (V/F) |
| Sensorless flux vector control (No PG) |
| Closed loop vector control (Have PG) |
| Startup torque | G Type:0.5Hz/150%(No PG)； |
| P Type:0.5Hz/100% |
| Speed range | 1:100(No PG) |
| Speed stability accuracy | ±0.5%(No PG) |
| Torque control accuracy | ±5%(Have PG) |
| Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated
current. |
| P type: 60s for 120% of the rated current, 3s for 150% of the rated
current |
| Torque boost | Fixed boost |
| Customized boost 0.1%–30.0% |
| V/F curve | Straight-line V/F curve |
| Multi-point V/F curve |
| N-power V/F curve (1.2-power, 1.4-power, 1.6-power,1.8-power,
square) |
| V/F separation | Two types: complete separation; half separation |
| Ramp mode | Straight-line ramp |
| S-curve ramp |
| Four groups of acceleration/deceleration time with the range of
0.0–6500.0s |
| DC braking | DC braking frequency: 0.00 Hz to maximum frequency |
| Braking time: 0.0-100.0s |
| Braking action current value: 0.0%–100.0% |
| JOG control | Jog frequency range:0.00Hz~50.00Hz. JOG acceleration/deceleration
time0.0s~6500.0s. |
| Onboard Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or by
input terminal states |
| Onboard PID | It realizes process-controlled closed loop control system easily. |
| Auto voltage | It can keep constant output voltage automatically when the mains
voltage changes. |
| regulation (AVR) |
| Over-voltage/ | The current and voltage are limited automatically during the
running process so as to avoid frequent tripping due to
over-voltage/over-current. |
| Over-current stall |
| control |
| Rapid current limit | It helps to avoid frequent over-current faults of the inverter. |
| Torque limit and torque control | It can limit the torque automatically and prevent frequent
over-current tripping during the running process. |
| Individualized function | High performance | Control of asynchronous motor is implemented through the
high-performance current vector control technology. |
| Instantaneous stop doesn’t stop | The load feedback energy compensates the voltage reduction so that
the AC drive can continue to run for a short time. |
| Timing control | Timing range 0.0Min～6500.0Min |
| Communication methods | RS-485 |
| Operation | Running command channel | Given by the panel, control terminals, |
| Serial communication port, can be switched by many ways |
| Frequency source | 10 kinds of frequency source, given by digital analog voltage,
analog current, Pulse, serial port. can be switched by many ways |
| Auxiliary frequency source | There are ten auxiliary frequency sources. It can implement fine
tuning of auxiliary frequency and frequency synthesis |
| Input terminals | 5 digital input terminals, one of which supports up to 100 kHz
high-speed pulse input; |
| 1 analog input terminal, supports 0-10V voltage input or 4–20 mA
current input. |
| Output terminal | 1 digital output terminal |
| 1 relay output terminal |
| 1 analog output terminal :that supports 0–20 mA current output or
0–10 V voltage output |
| Display and operation panel | LED display | It displays the parameters. |
| Key locking and | It can lock the keys partially or completely and define the |
| function selection | function range of some keys so as to prevent mis-function. |
| Protection mode | Motor short-circuit detection at power-on, input output phase loss
protection, over-current protection, over-voltage protection, under
voltage protection, overheat protection and overload protection. |
| Environment | Installation location | Indoor, avoid direct sunlight, dust, corrosive gas, combustible
gas, oil fog, steam, drip or salt. |
| Altitude | Lower than 1000 m(Lower the grades when using higher then 1000m) |
| Ambient temperature | -10°C ～40°C (Lower the grades if the ambient temperature is between
40°C and 50°C) |
| Humidity | Less than 95%RH, without condensing |
| Vibration | Less than 5.9m/s2(0.6g) |
| Storage temperature | －20℃~＋60℃ |
Model Specification
| Selection Guide | | | | |
| Model | Input voltage | Rated output power (KW) | Rated input current(A) | Rated output current (A) | Motor power (KW) |
| T200-0R4G-2 | 1PH AC 220V+/-15% | 0.4 | 5.4 | 2.1 | 0.4 |
| T200-0R75G-2 | 0.75 | 7.2 | 3.8 | 0.75 |
| T200-1R5G-2 | 1.5 | 10 | 7.2 | 1.5 |
| T200-2R2G-2 | 2.2 | 16 | 9 | 2.2 |
| T200-3R7G-2 | 3.7 | 23 | 13 | 3.7 |
| T200-0R4G-4 | 3PH AC 380V+/-15% | 0.4 | 3.4 | 1.5 | 0.4 |
| T200-0R75G-4 | 0.75 | 3.8 | 2.1 | 0.75 |
| T200-1R5G-4 | 1.5 | 5 | 3.8 | 1.5 |
| T200-2R2G-4 | 2.2 | 5.8 | 5.1 | 2.2 |
| T200-3R0G-4 | 3 | 8.5 | 7.2 | 3 |
| T200-3R7G/5R5P-4 | 3.7/5.5 | 10/15 | 9/13 | 3.7/5.5 |
| T200-5R5G/7R5P-4 | 5.5/7.5 | 15/20 | 13/17 | 5.5/7.5 |
| T200-7R5G/11P-4 | 7.5/11 | 20.0/26.0 | 17/25 | 7.5/11 |
| T200-11G/15P-4 | 11/15 | 26/35 | 25/32 | 11/15 |
| T200-15G/18.5P-4 | 15/18.5 | 35/38 | 32/37 | 15/18.5 |
| T200-18.5G/22P-4 | 18.5/22 | 38/46 | 37/45 | 18.5/22 |
| T200-22G/30P-4 | 22/30 | 46/62 | 45/60 | 22/30 |
| T200-30G/37P-4 | 30/37 | 62/76 | 60/75 | 30/37 |
| T200-37G/45P-4 | 37/45 | 76/92 | 75/90 | 37/45 |
| T200-45G/55P-4 | 45/55 | 92/113 | 90/110 | 45/55 |
| T200-55G/75P-4 | 55/75 | 113/157 | 110/152 | 55/75 |
About ZONCN
Founded in 2006 and headquartered in Songjiang, Shanghai, ZONCN is a leading high-tech enterprise and "National Specialized,
Refined, Featured, and Novel Small Giant" focusing on electrical
drive and industrial automation . Covering nearly 100 acres, it
integrates R&D, production, sales, and service of core
industrial products.
Its flagship offerings include VFD inverters, servo drive systems,
and new energy vehicle drives. The VFD portfolio spans 6 main
series (e.g., NZ100, Z2000) with voltage ranges 110V-1140V and
power 0.4kW-1200kW, widely used in machinery, water treatment,
metallurgy, and more . Backed by a professional R&D team and
world-class test centers, it holds hundreds of patents .
With ISO9001 and CE certifications, ZONCN has over 80 global
offices, exporting to 50+ countries like Russia, Spain, and Brazil
. Guided by the mission of "energy conservation via advanced
technology," it provides 24/7 technical support and ODM services,
striving to be a pioneer in domestic industrial automation .
