New M25 2+1+5 core, nylon material, high voltage, new energy,
waterproof, IP67, self-locking connector.
M25 size, 2+1+5 pin configuration (2 for main power line, 1 for
signal/ground or neutral, 5 for control/auxiliary signal port),
made of engineering nylon (PA) material, with a self-locking
structure and anti-detachment design, it is a high-voltage
waterproof connection solution designed specifically for new energy
power systems (such as photovoltaic inverters, energy storage
equipment, electric charging piles, small motor control boxes,
etc.). The whole unit meets the IP67 protection rating, is
weather-resistant and corrosion-resistant, easy to install, and has
low maintenance costs.
Product Highlights (Selling Points)
High Protection Rating: IP67 (short-term immersion), suitable for
outdoor and humid environments.
Self-Locking Structure: Reliably locks in place without additional
tools, preventing loosening and mis-insertion.
High Voltage Resistant Design: Compatible with common voltage
levels in new energy systems (see electrical performance table).
Excellent Insulation and Heat Resistance: Flame-retardant nylon
material, wide temperature range, and anti-aging properties.
Modular Pin Layout: 2+1+5 pin layout, supporting integrated power +
signal/control cabling.
Installation-Friendly: Suitable for both panel mounting and cable
connection, high insertion/removal cycles, and long lifespan.
Parameters:
| Cable OD | Ø6.0-14.0MM |
| Hardware Material | Copper gold plating |
| Contact Resistance | ≤ 10 mΩ |
| Connection Mode | Push Locking |
| Operating Rated | -40-+105 |
| Flame Retardant Grade | UL94 V-0 |
Performance Test Report (Factory Test)
| Parameter | Common typical values or ranges | Notes |
| Voltage Rating | 250 V / 400 V / 450 V | Some models support high voltage levels (such as solar or power
systems) |
| Current Rating | Main power pin test (2 pins) | 30A ~ 35A |
| Contact Resistance | ≤5 mΩ | Some outdoor connector designs require ≤ 5 mΩ to reduce heat and
voltage drop |
| Signal pin test | Low power pin test (5 pins) | 3A ~ 5A |
| Dielectric Withstanding Voltage | Several thousand volts (e.g. 1.5 kV / 60 s, etc.) | Responding to surges or transient overvoltages |
| Insulation Resistance | ≥10 MΩ / 500 VDC | Prevent leakage and insulation breakdown |
| Operating Temperature | –40°C to +105°C (or higher) | For outdoor environments with temperature changes |
| Ingress Protection | IP68 | Indicates that it can be immersed in water for a long time under
specified conditions and prevent dust from entering |
| Media durability / humidity / salt spray test | Often pass salt spray test / high humidity aging test | For long-term outdoor reliability |
After-Sales Service
- Warranty Period: 12 months warranty from the date of shipment
(excluding damage caused by human error).
- Fault Determination: If a quality problem is discovered during use,
the user should provide photos/videos of the faulty product and the
batch number. We will respond within 48 hours (working days).
- Defective Product Handling: After confirmation of a quality issue
on our end, the customer can choose to have the product repaired,
replaced, or receive a proportional refund. Specific Process:
- Customer submits problem & proof (photos/videos/test report)
- Our technical team determines the cause and provides a solution.
- If a return or exchange is required, it will be handled according
to the logistics method agreed upon by both parties.
- Technical Support: Free technical consultation is provided (product
selection, wiring diagrams, installation suggestions). On-site
support can be provided when necessary (according to contract
terms).
- Spare Parts and Long-Term Supply: For long-term projects, spare
parts and priority supply agreements can be signed to guarantee
long-term supply and price stability.
