283-325V,9.1KW A06B-6096-H106 AC Servo Amplifier Fanuc ALPHA SERVO MODULE

283-325V,9.1KW A06B-6096-H106 AC Servo Amplifier Fanuc ALPHA SERVO MODULE

Item Description

• Manufacturer: Fanuc
• Model #: A06B-6096-H106 or A06B6096H106
• Category: Servo Amplifier
• SERVO AMP MODULE
• SVM1-130
• Item Weight: 20 lbs.

Description:

Rated Input 283-325V

MAXIMUM OUTPUT VOLTAGE 230V

RATED OUTPUT CURRENT 52.2v

POWER 9.1kw

Quick detail

1. Make NC PRM 960.3 (PMN) = 0 (Enables PMM function).
2. Select where parameters are to be saved (to save to memory card on i series controls make PRM 960.2 (MD2) = 0 and PRM 960.1 (MD1) = 1, to save as a part program make PRM 960.1 = 0).
3. Set parameter 8760 to the program number you want the parameters to be stored as. Note 1.
4. Press the SYSTEM button then the RIGHT CHAPTER button until the Power Motion Manager screen is displayed.
5. Press the SYSTEM soft key.
6. Press the PARAM soft key.
7. Press the OPRT soft key.
8. Press the RIGHT CHAPTER button. READ and PUNCH soft keys will be displayed.
9. Select EDIT mode.
10. To save parameters from Beta drive to CNC press the READ soft key, press the ALL soft key then the EXEC soft key.
11. To restore the parameters from the CNC to the Beta drive press the PUNCH soft key, press the ALL soft key then the EXEC soft key.
Parameter 960.0 (SLV) determines how many slaves are displayed on the screen when the Power Motion Manager is selected.
0 = One slave.
1 = Up to four slaves with the screen divided into four.
Parameters 960.1 (MD1) and 960.2 (MD2) set the slave parameter input/output destination.
MD1 = 0, MD2 = 0, destination is the part program storage.
MD1 = 1, MD2 = 0, destination is the memory card.
Parameter 960.3 (PMN) sets the status of the power motion manager function.
0 = Enabled
1 = Disabled (Communication with slaves is not performed).
Note 1: The program under which the parameters will be stored is derived by multiplying the number of the Fanuc Beta Drive I/O link group by 10 and adding the result to the value in parameter 8760. So if the group number is 2 and the value of parameter 8760 is 9000, then 9000 + (2 x 10) = 9020, the parameters will be stored in program O9020

Our company OUTER ELECTRONIC TECHNOLOGY (HK) LIMITED focus is on steel mills, power plants, cement plant , chemicals, paper, CNC numerical control machine tool industry system spare parts! Main products: DCS system cards, spares of turbine ,generator ,boiler ,blower , coal mill , motor , transformer , pump, valve , air compressor , meters and Instruments , cable and wire , actuator , circuit Breaker , gear reducer, coal feeder and flame , servo controllers, etc.

we are the major partner with leading companies in China including SEC, Dongfang and HEC. We have long-term business relationships with world majors like Samra , Vedanta, and PT PJB and so on .

We are upholding to creating as a leading player in the worldwide energy and machinery industry! You are welcome to contact us for more information!

Stand in customers’ situation to grasp the quality, coupled with our genuine service, we attain deep trust and recognition from our clients.
 

Hontai business scope include:

Export products :

- turbine

- generator

- boiler

- blower

- coal mill

- Flame ignition & spares 

- Actuator 

- Motor 

- Reducer 

- Valve 

- ESP 

- Coal feeder 

- Electric panel 

- Instrument & indicator 

- Other industry spares for replace : relay , fuse , transformer , solenoid value , 

limited switch , transducer , sensor , thyristor and so on .

Import products :

- Coconut fiber

- Imported brand IC 

- EPRO sensor