WESPC Original FC70DR Emergency Cooling System Controller for
Diesel Engine Fire
| Working voltage | DC 8V----36V Continuous |
| Power consumption | Working: MAX 3W (Standby: MAX 2W) |
| Operating temperature | -25-65℃ |
| Storage temperature | -40-80℃ |
| Excitation output | DC+VE supply voltage |
| Overall dimension | 210mm*160mm*50mm |
| Panel cutout | 186*142mm |
| Weight | 0.7Kg |
Summary
This controller is used for fire pump units driven by diesel
engines, which has the functions of parameter setting, start, stop,
parameter monitoring, fault monitoring and protection.
4.3 inch LCD screen display with brand new UI design is adapted in
this controller can display related parameters directly. The LCD
screen can display various faults at the same time. Once the unit
does not run normally, it can effectively achieve protection.
There are Chinese/English interface options, more language can be
set according to user’s request. All the parameters can be
configured through the front face buttons or use programmable
interface by RS485 or USB to adjust via PC.
Main Features
Dual core 32bit high performance single chip microcomputer.
4.3 inch LCD screen, Available in Chinese/English languages, user’s
language set if necessary.
Indicator and number display through UI surface.
Acrylic material is adapted to protect the screen.
Silicone panels, waterproof, oil-proof, UV-resistant, good
operation feel and long service life.
USB Port: parameters can be set even without power through USB port
to monitor in real time.
With RS485 communication port, can achieve "Three Remote" functions
via MODBUS protocol.
Standard CAN communication port, built-in J1939 protocol.
Various kinds of parameters display.
Input/output function, status can be shown directly.
More categories of surface setting.
Real time clock inside: preset time operate and auto maintenance is
available. Genset working plan can be set as per week or month.
Three class protection countdown function, which can set the
maintenance time or date.
The black box function can save the relevant parameters of the unit
when the fault alarm occurs in real time, and it is convenient to
find the cause of the fault.
Totally 11 relay’s output, among which 7 relay output can be
self-configurable, each relay can be set as max 50 functions.
With 6 switches input, up to 40 functions optional.
4 sensor simulation input connectors, 4 input types is configurable
and various kinds of units can be set.
2 voltage sampling points of battery packs and 1 voltage sampling
points of battery charger.
2 battery packs can be switched to start the unit.
Battery charging control function,which can protect the battery
according to battery voltage status.
Sensor can be self-defined by front face button or PC software.
Various of crank conditions (RPM, External input , Oil Pressure,)
can be chosen.
Control Protection: Auto Start/Stop of unit, perfect failure
display and protection.
Standard water-proof rubber gasket. The waterproof can reach IP65.
Module design: All the connections are adapted with European
connectors so that installation, connection, repair and replacement
can be more easily.
