WESPC Original Smartgen HSC960 Generator Controller for Parallel
Operation
| Size | 130*112*39mm |
| Weight | 0.56kg |
| Model Number | HSC960 |
| Brand Name | Smartgen |
| After-sales Service Provided | Video Technical Support,Online Support |
| Markrting Type | Ordinary Product |
| Warranty | 1 year |
| Stock | Yes |
HSC960 genset controllers integrate digitization,
intellectualization and network technology which are used for gas
genset automation and monitor control system of single unit to
achieve automatic start/stop, data measure, alarm protection, three
remote: remote control, remote measuring and remote communication
and speed regulation. The controller adopts large liquid crystal
display (LCD) and selectable Chinese and English interface with
easy and reliable operation.
HSC960 genset controllers adopt micro-processor technology with
precision parameters measuring, fixed value adjustment, time
setting and set value adjusting and etc..All parameters can be
configured from front panel, or by configurable port, and also can
be configured by RS485 communication interface to adjust and
monitor via PC. It can be widely used in all types of automatic
genset control system with compact structure, advanced circuits,
simple connections and high reliability.
Performance and Characteristics:
HSC960, used for single automation systems; it regulates the speed
simply by adjust the throttle opening via the driving stepper
motor; auto start/stop of the unit are performed with the help of
remote signal.
Key characteristics:
1. 132×64 LCD with backlight, multilingual interface (including
Chinese and English), pushbutton operation;
2. Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase
2-wire, and 2-phase 3-wire systems with voltage 120/240V and
frequency 50/60Hz;
3. Collects and shows 3-phase voltage, current, power parameter and
frequency of generator.
4. For generator, controller has over and under voltage, over and
under frequency, over current functions;
5. Speed regulation function (via Driving Stepper Motor);
6. Precision measure and display parameters about Engine,
7. Protection: automatic start/stop of the genset, ATS(Auto
Transfer Switch) control with perfect failure indication and
protection function;
8. ETS (Energize to Stop), idle control, preheat control and raise
speed/drop speed control; in addition, they are all relay output.
9. Parameter setting: parameters can be modified while write in
EEPROM storage and cannot be lost even in case of power outage; all
parameters can be configured from front panel, or by configurable
port (SG72 must be fitted) and RS485 port to adjust via PC.
10. Multiple crank disconnect conditions (speed sensor, oil
pressure, generating) are optional;
11. Widely power supply range DC(8~35)V, suitable to different
start battery voltage environment;
12. All parameters used digital adjustment, instead of conventional
analog modulation with normal potentiometer, more reliability and
stability;
13. Fixed with metal clips;
14. Modular design, self-extinguishing ABS plastic enclosure,
pluggable connection terminals and embedded installation way;
compact structure with easy mounting.
