WESPC Original DC42DR-ABF MK3 Genset Control Panel Module
Controller
Operation Voltage | DC8-36V Continuous |
| Rotate speed sensor Frequency | 50-10000Hz |
| Working condition | -25-65℃ |
| Storage condition | -40-85℃ |
| MAX Accumulating Time | 9999.9Hours(Min Store time:6min) |
| Overall dimension | 189mm×134mm×50mm |
| Panel cutout | 160mm×120mm |
| Weight: | 0.68Kg |
Summary
This series controller is specialized for Diesel / Gasoline / Gas
Genset Start, Stop,Parameters monitoring, faults-checking as well
as data setting.
The controller has a 3 inch large screen point array LCD screen,
can display various faults in the same time that the genset will be
stopped once it can not work smoothly.
There are Chinese/English interface options, more language can be
set according to user’s request. All the parameters can be
configured through the front face buttons or use programmable
interface by USB and RS485 to adjust via PC. It can be widely
applied for all kinds of auto control system of gensets.
Features
There are four Models under DC4xD MK3 series.
DC40D MK3: used for single machine automation. Start/Stop through
remote start signal.
DC42D MK3:Based on DC40D, it adds Mains monitoring and AMF
(Mains/Generator automatic switching control ) , especially
suitable for the automation system composed by mains and genset.
DC40DR MK3:Based on DC40D, it adds RS485 communication port.
DC42DR MK3:Based on DC42D, it adds RS485 communication port.
DC42DR-ABF MK3:Based on DC42DR, it adds ABF backup battery pack
measurement and control function.
Main Features
32 units Micro-procession technology is used.
3 inches 128*64 LCD display with backlight, option language
interface(Chinese/English), user’s language set if necessary.
Control Protection: Auto Start/Stop of genset, load transfer (ATS
control) and perfect failure display and protection.
Various of crank conditions (RPM, Frequency, Oil Pressure) can be
chosen
Gather and display various engine and generator’s parameters. Adapt
to 3P4W,1P2W,2P3W (120V/240V,50/60HZ)
Sensor can be self-defined by front face button or PC software.
With RS485 communication port, can achieve “Three Remote” functions
via MODBUS protocol.
Input/output function, status can be shown directly.
More categories of surface setting.
Real time clock inside: preset time operate and auto maintenance is
available. Genset working plan can be set as per week or month.
Countdown function, which can set the maintenance time or date.
Records function: relative faults shall be recorded in real time.
Totally 6 relay’s output, among which 4 relay output can be
self-configurable, each relay can be set as max 20 functions,
besides, there are 4 groups as non-contact terminals.
5 relays can be set as switch value input, and each can be set as
max 10 functions.
3 sensor simulation input connectors, 5 input types is configurable
and various kinds of units can be set.
Standard water-proof rubber gasket. The waterproof can reach IP65.
Module design: All the connections are adapted with European
connectors so that installation, connection, repair and replacement
can be more easily.
