WESPC Original SmartGen MGC100 Manual Remote Start Generator
Controller Module
| Size | 105.8*61*36.6mm |
| Weight | 0.094kg |
| Model Number | MGC100 |
| Brand Name | Smartgen |
| After-sales Service Provided | Video Technical Support,Online Support |
| Markrting Type | Ordinary Product |
| Warranty | 1 year |
| Stock | Yes |
Technical Parameters:
Display LED Nixie Tube
Operation Panel PET
Digital Input 4
Relay Output 3(one transistor output)
AC System 1P2W/2P3W/3P3W/3P4W
Alternator Voltage (15~360)V(ph-N)
Alternator Frequency 50/60Hz
DC Supply DC(9-18)V
Case Dimensions(mm) 105.8*61*36.6
Panel Cutout(mm) 92*44
Operating Temp. (-25~+70)℃
Product Overview:
MGC100 Petrol Genset Controller is designed for start and
protection of single genset. It allows manual and remote
start/stop, data measurement, alarm indicate, shutdown protection
functions. The controller fit with LED display, button-press
operation, and it achieves precise measurement of various
parameters, protection and control of genset. All of parameters can
be configured from front panel. The controller which can be widely
used in data display and fault protection of a number of small
diesel and petrol genset with easy operation, reliable work,
compact structure and simple connections.
PERFORMANCE AND CHARACTERISTICS:
- Multifunctional Nixie tube display, press button to operate;
- There is a red LED on the panel for displaying working and alarm
status;
- Chose to control Petrol Genset or Diesel Genset via connection;
- Suitable for 3-phase 4-wire, 3-phase 3-wire, 2-phase 3-wire,
single phase 2-wire (120V/240V)systems with frequency 50/60/Hz;
- Protection function for gen under/over volt, over speed, fail to
stop, emergency stop, high water temp, low oil pressure; when in
protection, LED indicates alarm, and goes shutdown protection;
- Generator rotate speed can derive from gen frequency or rotate
speed sensor;
- 4-way digital input (high water temperature input, low oil
pressure input, remote input, urgency stop input;
- 2 relay output(start output, fuel output) and the fuel output is
flexible output;
- 1 flexible transistor output can be set to preheat output, alarm
output, energize to stop output and idle output, etc;
- Two start success conditions (rotate speed sensor, generate) can
be chosen;
- Parameter setting: parameters can be modified and stored in
internal EEPROM memory and cannot be lost even in case of power
outage; all of them can be adjusted using front panel of the
controller;
- Modular design, anti-flaming ABS plastic enclosure, embedded
installation way; compact structure with easy mounting.
