WESPC Original DC82D MK3 Generator AMF Control Unit with LCD
Display
| Working voltage | DC8V----36V Continuous |
| Rotate speed sensor Frequency | 200-10000Hz |
| MAX Accumulating Time | 99999.9Hours(Min Store time:6min) |
| Working condition | -25-65℃ |
| Storage condition | -40-85℃ |
| Overall dimension | 241mm*177mm*45mm |
| Panel cutout | 220mm*160mm |
| Weight | 0.9Kg |
Summary
This series controller is specialized for Diesel / Gasoline / Gas
Genset Start, Stop, Parameters monitoring, faults-checking as well
as data setting.
4.3inch colorful LCD screen display with brand new UI design is
adapted in this controller that the relative failures can be
displayed directly. All the parameters can be displayed by
simulated indicators and words. Besides, LCD screen can display
various faults in the same time that the genset will be stopped
once it can’t work smoothly.
There are Simplified Chinese, Traditional Chinese, English,
Spanish, Russian interface options, more language can be set
according to user’s request. All the parameters can be configured
through the front face buttons or use programmable interface by
RS485 or USB to adjust via PC. It can be widely applied for all
kinds of auto control system of gensets.
Main Features
There are four Models under DC8xD MK3 series.
DC80D MK3: used for single machine automation. Start/Stop through
remote start signal.
DC82D MK3: Based on DC80D MK3, it adds Mains monitoring and AMF
(Mains/Generator automatic switching control), especially suitable
for the automation system composed by mains and genset.
DC80DR MK3: Based on DC80D MK3, it adds RS485 port.
DC82DR MK3: Based on DC82D MK3, it adds RS485 port.
32bit high performance single chip microcomputer.
4.3inch TFT colorful big screen LCD, Available in 5 languages,
user’s language set if necessary.
Indicator and number display through UI surface.
Acrylic material is adapted to protect the screen.
