Wespc Original HGM1780 Generator Controller Genset LCD Control
Module
| Size | 90*78*44mm |
| Weight | 0.15kg |
| Alternator Frequency | 50/60Hz |
| Operating Temp | -25~+70℃ |
| Storage Condition | Temperature: (-30~+80)ºC |
| Panel Cutout | 78*66mm |
| Digital Input | Active when connected to B- |
| Working Voltage | DC8. 0V to 35. 0V, Continuous Power Supply |
DESCRIPTION:
HGM1780 is a genset automatic start module with 3 working modes
that can be selected from the front panel. It can detect one-phase
generator voltage and current, can be started and stopped manually
or via a remote start/stop signals. In case of faults (such as low
oil pressure, high water/cylinder temperature, emergency stop
alarm, over speed), HGM1780 can automatically disconnect fuel relay
and close ETS electromagnet to stop the generator. Graphical LCD
monitor on the front panel displays fault conditions and provides
effective alarm signals.
PERFORMANCE AND CHARACTERISTICS:
- Based on microprocessor, fitted with LCD screen with graphic
icons and touch-buttons;
- Power supply range (8~35)VDC,compatibility with 12V or 24V
starter batteries;
- Generator input port; speed, temperature, pressure, liquid level
sensor input ports; digitalized electric quantity display.
- Generator voltage, battery voltage, engine speed, temperature,
pressure, liquid level threshold value can be set.
- Idle control and ETS function (must be configured);
- 3 working modes: manual, auto, stop;
- The controller can be set as an engine controller via software
(generator voltage input is deactivated) and used as water pump
unit controller;
- Running status and alarm status are indicated by red LED on the
panel;
- Compatibility with multiple temperature, pressure, fuel level
sensors, which can be user-defined and used directly; temperature
sensors,pressure sensors can be used in parallel with annunciator,
providing digital data and increasing protection level at the same
time;
- Multiple crank disconnect conditions to select (engine speed
sensor, oil pressure, generator);
- 2 fixed relay outputs (fuel relay, start relay);
- 1 configurable output port which can be set as common alarm
output, fail to stop output, preheat output or idle control output;
- Parameters can be set and modified by users and saved in internal
FLASH storage, which means that they will not be lost in case of
power off. All parameters of the controller can be modified using
the front panel or through configurable LINK port via PC software
(SG72 adapter, produced by our company must be used). All
parameters can be set via computer using one USB port of the
computer, which also allows to avoid batteries: power supply for
the controller can come directly from the PC USB port.
- HGM1780 combines modular design, anti-flaming ABS plastic case,
embedded installation, compact structure, small size, SCM control,
stable performance and convenient operation.
TECHNICAL SPECIFICATIONS:
Display Icon-LCD
Operation Panel PET
Digital Input 2
Relay Output 3
Analogue Input 3
AC System 1P2W
Alternator Voltage (15~360)V(ph-N)
Alternator Frequency 50/60Hz
Programmable Interface LINK
DC Supply DC(8-35)V
Case Dimensions(mm) 90*78*44
Panel Cutout(mm) 78*66
Operating Temp. (-25~+70)℃
