1 Heating Zone Vertical Elevator Furnace For Magnetic Materials

This equipment is mainly designed for electronic ceramic materials, magnetic materials, ceramic filters, etc. requiring high uniformity of temperature field or multi-species small batch production occasions.

• Effective Chamber Size: 500×500×500mm (D×H×W)
• Overall Dimensions (Reference): 1740×2780×2505mm
• Temperature Range: 1600°C - 1700°C
• Heating Elements: U-shaped silicon molybdenum rods (MoSi2)
• Heating Zones: 1 zone
• Insulation Materials: Alumina products / ceramic fiber materials
• Atmosphere: Clean, dry, oil-free compressed air / oxygen
• Control Points: 1 point
• Temperature Controller: Dahua Chino Intelligent PID Regulator
• Power Supply: 220/380V AC, 50Hz
• Maximum Power: 50kW
• Equipment Weight: Approx. 2000kg
• External Dimensions: 1740×2780×2505mm(D×W×H) (without control cabinet)
• Appearance Color: Light gray

• Environmental Conditions: temperature: 0~40ºC, humidity≤ 80%RH, no corrosive gas, no strong airflow disturbance
• Atmosphere Conditions: dry, clean, oil-free compressed air, working pressure of 0.2-0.4MPa, gas consumption of 10 - 30 m3/h
• Ventilation System: non-contact access to the user pumping system, pumping capacity is greater than 35 m3/h
• Ground Requirements: horizontal, no obvious vibration, load-bearing> 600 Kg/m2
• Power Condition(TBD): capacity > 70kVA, 3-phases 5-lines, voltage 220 / 380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green
• Installation Site: 3800mm×2650mm×3500mm(D×W×H), with an installation area greater than 12m2

Company Profile

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces.

Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics.

These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.