950kg Safety Protections High-Temperature Box Furnace
Basic Equipment Information
Model:
HBF52-17NO High-Temperature Box Furnace
Application Fields:
High-temperature sintering processes for ITO targets, microwave
ferrites, magnetic materials, electronic components, ceramic
filters, and similar materials.
Core Technology & Performance Parameters
Temperature Control:
- Rated Temperature: 1650°C
- Max Temperature: 1700°C
- Temperature Stability: ±1°C (PID auto-tuning)
- Temperature Uniformity: ±5°C (tested at 1650°C for 2 hours, empty
furnace)
- Thermocouple Type: Type B (single-point measurement at side center)
- Programmable Segments: 4×16 segments
Heating System:
- Heating Elements: U-shaped silicon molybdenum rods
- Heating Rate: RT→1200°C ≤5°C/min, 1200→1700°C ≤2°C/min
- Max Heating Power: 25kW
- Idle Holding Power: ≤10kW
Furnace Chamber & Atmosphere:
- Effective Dimensions: 350×300×500mm (W×H×D)
- Atmosphere: Air or oxygen (requires matching gas supply)
- Exhaust Chimney: Top-mounted auto-opening/closing design
Safety Protections:
- Over-temperature & thermocouple failure alarm (audible/visual)
- Over-temperature power cutoff
Other Configurations:
- Surface Temperature Rise: ≤40°C
- Weight: ~950kg
- Dimensions: 1620×1960×1220mm (W×H×D)
- Color: Light gray
Operating Conditions
Environmental Requirements:
- Temperature: 0-40°C
- Humidity: ≤80%RH
- No corrosive gases/strong air currents
Gas Supply Requirements:
- Clean dry compressed air: 0.2-0.4MPa, 2-6m³/h
- High-purity oxygen: Same parameters
Installation Requirements:
- Floor: Level, vibration-free, load-bearing >300kg/m²
- Power: 3-phase 5-wire, ≥34KVA, 220/380V 50Hz
- Space: 2000×3000×1500mm (recommended area >3m²)
Key Precautions
- Uniformity based on empty furnace tests; verify parameters after
loading
- Program stepwise heating/cooling to avoid equipment damage
- Set over-temperature alarms per process requirements
- Strictly prohibit oils/organic solvents in oxygen environments
- Regularly inspect silicon molybdenum rods (e.g., cracks/resistance
changes)
- Test chimney auto-switch periodically to prevent vent blockage
Delivery List
| Item | Note | QTY |
|---|
| Basic Compositions | Furnace | 1 PC |
| Certificates of Inspection | Furnace and major purchased components | 1 Set |
| Technical Documents | Furnace specifications, technical documents of major purchased
components | 1 Set |
| Key Parts | Heating Elements (MoSi2) | 1 Set |
| Thermocouple | THERMOWAY, B Type | 1 PC |
| Temperature Controller | CHINO | 1 Set |
| Monitor | Proface 10" touch screen | 1 Set |
| Spares | Heating Elements (MoSi2) | 1 PC |
Product Images
Company Profile
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment
supplier specializing in the research and development, design,
manufacturing, sales, maintenance, and service of high-, medium-,
and low-temperature industrial furnaces and laboratory furnaces.
Our product range encompasses bell furnaces, box furnaces, hot air
furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie
hearth furnaces, rotary furnaces, roller hearth furnaces, and
pusher furnaces, which are extensively applied in fields such as
advanced ceramics, electronic components, thick-film circuits,
additive manufacturing, powder metallurgy, new energy, and
photovoltaics.
Frequently Asked Questions
What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air
furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom
furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the
most suitable products, along with highly customizable solutions to
meet your specific requirements.
What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and
sales, Chitherm possesses patented technologies and core resources
to deliver superior solutions.
