Sign In | Join Free | My burrillandco.com
Home > Supplies and Equipment >

SNU-HM hollow fiber submerged curtain UF

    Buy cheap SNU-HM hollow fiber submerged curtain UF from wholesalers
     
    Buy cheap SNU-HM hollow fiber submerged curtain UF from wholesalers
    • Buy cheap SNU-HM hollow fiber submerged curtain UF from wholesalers
    • Buy cheap SNU-HM hollow fiber submerged curtain UF from wholesalers
    • Buy cheap SNU-HM hollow fiber submerged curtain UF from wholesalers

    SNU-HM hollow fiber submerged curtain UF

    Ask Lasest Price
    Brand Name : SINOMEMB
    Model Number : SNU-HM
    Certification : NSF
    • Product Details
    • Company Profile

    SNU-HM hollow fiber submerged curtain UF

    SNU-HM hollow fiber submerged curtain UF

    SNU-HM type hollow fiber submerged curtain UF adopts a special patented technology in the spinning process and adds a reinforced reinforced lining, so it has all the advantages of PVDF material membrane filaments, but also has high strength and toughness. specialty. This feature fundamentally makes up for the biggest shortcoming of the traditional PVDF membrane, which is low in strength, easy to break, and cannot be well adapted to high-intensity aeration environments. It is of great milestone significance for the application of PVDF membrane in the MBR process. At the same time, since the design flux of the SNU-HM hollow fiber submerged curtain UF membrane is generally set to an appropriate value according to different water qualities, its online cleaning cycle is relatively long, about 7 to 17 days.

    Membrane element specifications and main performance

    modelSNU-HM-ⅠSNU-HM-Ⅱ
    Specifications ( mm )630×1500×36630×2000×36
    Membrane inside and outside diameter ( mm )1.5/2.60.8/1.4
    Effective membrane area (㎡)1520
    Filtration precision (μ m )0.05
    Membrane materialU-PVC/ABS
    membrane materialModified PVDF (polyvinylidene fluoride) and PET (polyester) support tubes
    Connecting pipe specificationΦ32
    Water collection methodWater catchment at both ends
    filter methodSubmerged Suction Filtration
    PH value2-12
    temperature (°C)10-45
    Oil content ( ppm )<3
    Transmembrane pressure TMP (Mpa)0.02-0.05
    Backwash pressure (Mpa)0.1
    Aeration rate ( m³/h )Air-water ratio 15:1-20:1
    Backwash water flux ( L/㎡·h )25-5025-36
    Collecting pipe center distance (mm)1500
    Sludge concentration ( ppm )4000-120003000-10000
    Design flux ( L/㎡·h )15-2512-18
    Product water qualityTurbidity≤0.2NTU, SDI≤3
    service life≥3 years under standard conditions

    n UF membrane element size

    Operation Guide

    During the operation of the UF system, it is necessary to avoid sudden changes in pressure during system start-up, shutdown, operation, cleaning, maintenance, etc., as well as exceeding the maximum withstand pressure specified in this manual, to prevent possible membrane breakage, sealing, etc. End fall off, membrane shell cracking and other serious damage consequences; this series of products have been treated with anti-corrosion and membrane wire protection before leaving the factory, and the inner membrane wire of the module is in a semi-dry state. For manual operation, the water production rate should be set to 50% of the design water production rate, and the initial water production must be discharged directly and cannot be used as product water.

    Product usage tips

    The normal start-up and normal cleaning and maintenance of the UF system are the key to ensure the long-term normal use of membrane products. Before starting the system, it should be ensured that the parameters of each valve, instrument, pre-processing equipment, signal transmission equipment, power equipment, etc. meet the design specifications and requirements, so as to ensure the safe, stable and up-to-standard operation of the overall system. Please refer to the product technical manual for the debugging and testing work of the system in the early stage.

    Disclaimer

    Failure to operate in strict accordance with the operating limits and guidelines set forth herein voids our limited warranty. If the UF system is out of service, please inject protective liquid inside the membrane module for anti-corrosion treatment, so as to avoid the increase of maintenance cost caused by the large number of microorganisms in the system.

    Quality SNU-HM hollow fiber submerged curtain UF for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Sinomemb Environment Technology (beijing) Co.,
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more MBR Membrane products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0