Application
The Electric Flat Transporter of BETTER allow movement charges at
ground level in all types of industries and applications, such as assembly line (ring production line, loop production line), metallurgy industry (steel ladle), warehouse transport, ship industry (maintenance, assemble, container transport), workpiece transport in workshop, lathe transport, steel factory (steel billet, steel plate, steel coil, steel pipe, section steel,
steel structure), construction (bridge, simple building, concrete, concrete column), petroleum industry (oil pump, sucker rod and parts), energy (polycrystalline silicon, generator, windmill), chemical industry (electrolytic cell, retort etc), railway (rail maintenance, rail welding, train tractor).
Parameter
| Model | BWP-5t | BWP-10 | BWP-15 | BWP-20t | BWP-30t | BWP-40t | BWP-50t |
| Rated Load(t) | 5 | 10 | 15 | 20 | 30 | 40 | 50 |
| Impacted rated load(t) | 7.5 | 15 | 22.5 | 30 | 45 | 60 | 75 |
| Structure of Frame | Steel plates welded, beam structure |
| Thickness of the steel plate | 8 | 10 | 12 | 14 | 14 | 16 | 16 |
| Cart weight(t) | 4.3 | 5.3 | 6.6 | 7.9 | 8.8 | 10 | 10.5 |
| Max. wheel load (t) | 2.8 | 4.6 | 4.3 | 5.6 | 7.7 | 10 | 12 |
| Ground requirement | Cement floor or Steel plate ground |
| Ground Clearance(mm) | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| Table size (mm) | 3000*2000 | 3600*2000 | 4000*2200 | 4500*2200 | 5000*2200 | 5500*2300 | 6000*2300 |
| Height of the whole cart (mm) | 450 | 530 | 600 | 600 | 650 | 700 | 700 |
| Wheel base (mm) | 1500 | 1500 | 1500 | 1700 | 1700 | 1800 | 1800 |
| Axles distance (mm) | 2500 | 3100 | 3400 | 3900 | 4300 | 4800 | 5200 |
| Turning radius (mm) | 2501 | 3101 | 3401 | 3901 | 4301 | 4801 | 5201 |
| Turning type | Turning while driving with no stop |
| Control method for turning | Control button |
| Turning structure | Mechanical |
| Motor power (KW) | 3 | 4.4 | 6 | 7 | 10 | 12 | 15 |
| Wheel diameter (mm) | 350-2/220-2 | 350-2/240-2 | 400-2/240-2 | 400-2/320-2 | 540-2/360 | 580-2/360-2 | 580-2/360-2 |
| Wheel material | ZG55+hydropurture |
| Running speed (m/min) | 0-20 |
| Brake principle | Electric magnetic brake |
| Ground balance | mechanical automatic adjustment |
| Operation method | With wire or no wire |
| Battery model | D-250 24pieces | D-330 24pieces | D-400 24pieces | D-440 24pieces | D-250 36pieces | D-330 36pieces | D-440 36pieces |
| Battery maintenance | Free of maintenance |
| Charger's installation | Installed on cart | Split-type |
| Cart color | Yellow and warning sign |
| Charger's function | Automatic stop for obstacles |
| Radar control | 3-0.3 m, Automatic stop for obstacles |
| Warning equipment | Sound and light |
| Other functions | Turning light, night light and power display |
Manufacturing process of warehouse transportation vehicle
CNC Cutting
Transport the steel plate from raw material warehouse to CNC
cutting workshop for cutting. After the cutting, the workers will
do some simple processing such as chip moving and setting out.
Preliminary Assembling
Put the cut steel plate together according to the design drawing
Welding
Weld the steel plate with automatic welding machine after the
preliminary assembling
Post weld treatment
Test the welding section after the welding, polish and burring.
Post weld treatment to eliminate welding stress
Spray Primer
Transport the structure part after processing to painting booth for
spraying primer. The main component of the primer is zinc rich
epoxy antirust paint. The primer is to two layers
Assembling
Assemble the structure parts after spraying primer with wheels,
motors and gear box, etc.
Paint finish
Transport the assembled cart to painting booth, inspect the
integrity of primer. After that paint the finish
Debugging
Debugging the cart after painting the finish with electric control
system, after the debugging, the cart will test without load. And
after the no load test, the cart will be tested with load. After
the inspection, the cart will be transported to storage area.
Product Details
Packaging&Shipping
*For lenght is less than 6m, the width is less than 2.2m. It will
be transported by 20ft container. If the length is longer than 5.9m
and less than 12m, it will be transported by 40ft container. If the
quantity is 2 sets or 3 sets, they can be transported by full
container. If the quantity is 1 set, it can be transported by LCL
Container.
* If the length is less than 12m, the width is beyond 2.2m. It
needs to be transported by flat rack (20 or 40 ft) . If the
equipment is beyond above dimension, and quantity need to consider
bulk cargo.
FAQ
1. Q: What is the table size and load capacity of this automatic
guided vehicle?
A:The size and load of the transfer cart is customized according to
your requirement.
2. Q: How do you transport the 2-50T Industry Standard Agv Transfer
Cart Automatic Guided Vehicle and what is the package ?
A: The cart's body is packed with tarp, the wheels and accessories
are packed with wooden case.
3. Q: What is the leading time, delivery term, and payment term?
A: Usually our leading time is 45 days.About the delivery term, we
accept , FOB, CIF. About the payment, we accept T/T or L/C, etc.
4. Q: What is your MOQ?
A: The MOQ is 1 set.
5. Q:Can we choose the power supply for the automatic guided
vehicle?
A:Yes,such as the cable drum, battery powered ,low voltage powered,
busbar powered ,trailing cable powered, etc.
6. Q:What certificates do you have?
A:ISO9001,CE,SASO,SGS,etc.
Certifications
Customers' Visit
Henan PETTER Handling Equipment Co., Ltd. Our company is
specializing in the Design and Manufacture of Flat Transfer Trolley
to solve every material handling requirement. Our product includes
Industrial Trailers, Transfer Cars, Electric Railway Transfer
Trolley, Scissor Lift Tables, Turntables and many other specialty
items.
