2pin right angle pogo pin magnetic power connector for camera and
audio application.
UPE – Professional Magnetic Connector & Cable Manufacturer | Custom
Solutions
UPE is a leading manufacturer of high-performance magnetic
connectors and magnetic cable connectors, specializing in
innovative, reliable, and customizable connectivity solutions.
Materials:
The yellow metal needle part is gold-plated with brass surface;
The plastic material is HTN+30%UL94 V-0 black,which can withstand
high temperatures.
The magnet adopts high-performance permanent magnet neodymium iron
boron;
Mechanical properties:
Spring force: 80g ± 20g at 1.0 working height,
Service life: 50,000times minimum.
Electrical properties:
Reference voltage: 12 V,
Contact static impedance of the needle:50mΩ Max (PIN).
High voltage test: AC1000V0.5mA 3SEC / DC 1000V 0.5mA 3 SEC.
Continuous working current: 5.0 A;
Product introduction and explaination:
The product adopts environmental protection materials, ROHS, REACH;
The attraction force of the magnetic male and female docking is
more than 600G.
Product anti-short-circuit structure design;
Polarity and electrical direction are clearly identified.
(The magnet can be coated with epoxy resin, and the salt spray test
can pass 48hours.)
The pin feet are fixed on the PCB board, and the pin spacing size
is stable.
Product application explaination (not limited to the following):
1. The PCBboard can be soldered with a plug-in;
2. Mold molding and injection molding;
2Pin Male Magnetic Connectors & Female Magnetic Connector
Parameter:
Name | Magnetic Connector |
Type | Male/Female |
Pin | 2pin |
Color | Black |
Pogo pin | Brass 0.125 um Auover 1.5um~2.5um Ni |
Female pin | Brass 0.125 um Auover 1.5um~2.5um Ni |
Insulator | HTN+30%UL94 V-0 black |
| Magnet | NdFeB N52 1.5um~2.5um Ni |
Spring force | 80g±20g,at 1.0mm working storke. |
Mechanical life | 50000 cycle Min.. |
Magnetic force | 600G |
Current | 5.0AMax |
Voltage | DC12V |
Contact resistance | 50mΩ Max (PIN). |
Operation Temperature | 25℃to +60℃ |
Salt spray test | 48H |
Certification | ROHS or REACH compliant product |
Test | 100% open and short test |
2Pin Male Magnetic Connector Technical Drawing
2Pin Female Magnetic Connector Technical Drawing
Advantages of Magnetic Connector:
1. Effortless Connectivity
✔ Automatic Adsorption – Smart, user-friendly design enables
instant and secure connections with magnetic alignment.
✔ Anti-Fall Protection – Easily detaches from the charging
interface while keeping devices stable, reducing accidental drops.
2. Unmatched Durability
✔ Extended Lifespan – Rated for 100,000–200,000 cycles, ensuring
long-term reliability.
✔ IPX8 Waterproof & Dustproof – Female end designed for harsh
environments (submersion up to 1M for 30 mins).
3. High-Performance Charging & Data Transfer
✔ Fast Charging (5A–10A) – Supports high-current transmission for
rapid power delivery.
✔ High-Speed Signal Transmission – Replaces traditional USB
2.0/HDMI 1.3, enabling Video/Audio signal transmission with stable
high-frequency performance.
4. Customizable & Safe Design
✔ Aesthetic Flexibility – Tailored appearance to match your
device’s design language.
✔ Anti-Short Circuit & Foolproof – Built-in protection against
misuse and electrical faults.
Magnetic connector products application:
1.Wearable devices, intelligent positioning equipment, children's
smart wristbands, smart watches, wearable mobile phones,Bluetooth
headsets, etc.) data cable, charging cable, magnetic strip wire end
connection
2.Medical equipment,wireless equipment,data communications
equipment,telecommunication equipment,Automation and industrial
equipment,audio-visual equipment
3.Aviation ,aerospace electronic,military communication
4.Automotive,car navigation,test and measurement equipment
5.Consumer Electronics(mobile phones,tablet computers,Bluetooth
headsets,camera,watch,portable consumer electronic products and
many other electronic fields.)
Why UPE shall be your partner?
1.Specialized Expertise in Magnetic Connectors
●Focused R&D: UPE has dedicated experience in magnetic
connectors
●Customization: UPE can tailor magnet strength, pin plating
(gold/nickel for ≤50mΩ resistance), and housing materials (black
PBT/nylon) to your needs.
2. High Durability & Compliance
●10,000+ Cycles Guaranteed: Their connectors likely undergo
rigorous testing to meet your mechanical life demand.
●Certifications: Compliant with UL, or RoHS standards—critical for
consumer/medical markets.
3. Competitive Manufacturing
●Cost-Effective Tooling: UPE may offer low MOQs (e.g., 1K–5K units)
with competitive pricing for small-to-medium batches.
●Quality Control: In-house testing for contact resistance, pull
force, and current load to ensure reliability.
4. Fast Prototyping & Support
●3D Samples in Days: Rapid prototyping for fit/function checks
●Engineering Support: Assistance with pinout optimization, EMI
shielding, or waterproofing (IP68).
5.Tailored Designs
Our in-house team of professional engineers collaborates closely
with clients to develop fully customized magnetic pogo pin
connectors tailored to your specific requirements.
6.Versatile Solutions
We design a wide range of magnetic connectors for diverse
applications, ensuring optimal performance, durability, and
seamless connectivity.
7. End-to-End Support
From concept to production, we provide end-to-end magnetic
connector customization services, delivering solutions that meet
exact industry standards and application needs.
How to Place Your Magnetic Cable Connector Order with UPE
1. Submit Your Requirements
Contact our sales team via:
Email: [union@upetech.net]
Phone: [+86 13434524996]
Online Form: [www.pogopinsconnector.com]
Provide details:
✔ Application (e.g., medical, automotive, consumer electronics)
✔ Connector type (e.g., magnetic pogo pin, charging cable)
✔ Specifications (voltage, current, size, waterproof rating, etc.)
✔ Quantity & lead time
2. Get a Custom Solution (If Needed)
Our engineers will review your needs and propose a custom design
(if required).
We’ll share 3D models, samples, or technical drawings for approval.
Payment Term:
50% Deposit (Paid upfront): Covers production costs (materials,
labor).
50% Balance (Paid before shipment): Ensures quality control and
commitment from both parties.
Payment method:
T/T (Bank Transfer),PayPal ,OCBC Bank
Recommendation:
Use PayPal for samples (safer).
Use T/T for bulk orders (lower fees).
Sample Lead Time: Inventory sample 2-3Working day/customized sample 5-7Working day
Production Lead Time:10-15Working day
Made For: America,Europe,Asia,South African
Trade Term: EXW
Freight: Air,Sea,Express
Service: High quality with reasonable price, OEM service, any special size,
color, designs are acceptable
Shipping
