2.2mm pitch 5A male and female 4pin magnetic connector with 90
degrees angle .
UPE – Professional Magnetic Connector & Cable Manufacturer | Custom
Solutions
UPE stands as a premier manufacturer at the forefront of
connectivity technology. We specialize in the design and production
of advanced magnetic connectors and high-performance cable
assemblies.
Male magnetic connector:
Materials:
-Insulator: HTN+30% UL94 V-0 black
-Magnet: Neodymium iron boron
Mechanical:
-Contact force:80g±20g at 1.0mm working storke
-Male and female adsorption Life test: 50,000cycle
-Adsorption capacity test:The parent docking adsorption is more
than 600G
Electrical:
-Reference voltage:12V,
-Continuous working current: 5.0 A;
-Contact static impedance of the needle:50mΩ Max (PIN).
-High voltage test: AC1000 V0.5mA 3SEC / DC 1000V 0.5mA 3 SEC.
Environmental performance:
-Environmental Test: Salt Spray 48 hours
Product application explaination(not limited to the following):
1. The PCB board can be soldered with a plug-in;
2. After soldering, the board can be molded and coated;
3. The PCB board can be connected with a terminal;
4. The mold can be molding and injection molding;
5. The wire can be directly soldered.
Female magnetic connector
Materials:
-The yellow metal needle part is gold-plated with brass surface;
-The plastic material is HTN+30%UL94 V-0 black, which can withstand
high temperatures.
-The magnet adopts high-performance permanent magnet neodymium iron
boron;
Electrical properties:
-Reference voltage: 12V,
-Continuous working current: 5.0 A;
-Contact static impedance of the needle:50mΩ Max (PIN).
-High voltage test: AC1000 V 0.5mA 3SEC / DC 1000V 0.5mA 3 SEC.
.Product introduction and explaination:
-The product adopts environmental protection materials, ROHS,REACH;
-The attraction force of the magnetic male and female docking is
more than 600G.
Product anti-short-circuit structure design;
-Polarity and electrical direction are clearly identified.
(The magnet can be coated with epoxy resin, and the salt spray test
can pass 48hours.)
-The pin feet are fixed on the PCB board, and the pin spacing size
is stable.
Product application explaination (not limited to the following):
1. The PCB board can be soldered with a plug-in;
2. Mold molding and injection molding;
4Pin Male Magnetic Connectors & Female Magnetic Connector
Parameter:
Name | Magnetic Connector |
Type | Male/Female |
Pin | 4pin |
Color | Black |
Pogo pin | Brass 0.125 um Auover 1.5um~2.5um Ni |
Female pin | Brass 0.125 um Auover 1.5um~2.5um Ni |
Shell | SUS304 |
Insulator | HTN+30% UL94 V-0 black |
| Magnet | NdFeB N52 1.5um~2.5um Ni |
Spring force | 80g±20g,at 1.0mm working storke. |
Mechanical life | 50000 cycle Min.. |
Magnetic force | 600g |
Current | 5.0AMax |
Voltage | DC12V |
Contact resistance | 50mΩ Max (PIN). |
Operation Temperature | 25℃to +60℃ |
Salt spray test | 48H |
Certification | ROHS or REACH compliant product |
Test | 100% open and short test |
4Pin Male Magnetic Connector Technical Drawing
4Pin Female Magnetic Connector Technical Drawing
Advantages of Magnetic Connector:
1)Automatic adsorption connected experience; Easy operation;
2)Uses a magnetic interface to remove the device easier.
3)High life cycle. It supports 50,000-300,000 reattachment life
times;
4)It is easy to customized waterproof design, the female can
achieve dust-proof and waterproof (IP68);
5)Support a high current (3A-20A), faster recharge;
6)Excellent corrosion rating (48H-120H) meet the harsh
environments；
8)Shape customized to meet with product shape matching, improve
product selling point;
9)Magnet positioning, use of magnets and structure to dual circuit
protection reach distinguish
the direction( It is user-oriented and user-friendly)
10)Excellent scalability interface,Can be achieved(Power Signal
Video Audio Jack Etc);
11)Development time is short, low-cost mold for customization;
12)Provide a reliable high RF signal transmission. Our connector is
USB 2.0
Magnetic connector products application:
Why UPE shall be your partner?
1. Professional customization service
2. Fast sample production capability
3. Strict quality control system
4. Processing with imported components
5. High-precision test equipment
6. Reasonable cost control procedures
7. Product environmental standards
How to Place Your Magnetic Connector Order with UPE
1. Submit Your Requirements
Contact our sales team via:
Email: [union@upetech.net]
Phone: [+86 13434524996]
Online Form: [www.pogopinsconnector.com]
Provide details:
✔ Application (e.g., medical, automotive, consumer electronics)
✔ Connector type (e.g., magnetic pogo pin, charging cable)
✔ Specifications (voltage, current, size, waterproof rating, etc.)
✔ Quantity & lead time
2. Get a Custom Solution (If Needed)
Our engineers will review your needs and propose a custom design
(if required).
We’ll share 3D models, samples, or technical drawings for approval.
Payment Term:
50% Deposit (Paid upfront): Covers production costs (materials,
labor).
50% Balance (Paid before shipment): Ensures quality control and
commitment from both parties.
Payment method:
T/T (Bank Transfer),PayPal ,OCBC Bank
Recommendation:
Use PayPal for samples (safer).
Use T/T for bulk orders (lower fees).
Sample Lead Time: Inventory sample 2-3Working day/customized sample 5-7Working day
Production Lead Time:10-15Working day
Made For: America,Europe,Asia,South African
Trade Term: EXW
Freight: Air,Sea,Express
Service: High quality with reasonable price, OEM service, any special size,
color, designs are acceptable
Shipping
