High Frequency Online UPS Uninterruptible Power Supply with lithium
battery solution
UPS Capacity 1kva to 10kva
Production Introduction:
This series UPS applies CPU intergrated control technology, which
allows UPS to response prometly and accurately when power outage,
high or low voltage, surge, transient or spike occurs while its
protection port provides protection for special external devices,
such as printers and so on. It possess automatic startup
function,automatic voltage regulation function and a wide range of
input voltage, so it is applicable to all kinds
of electric power environment. In addition, its design is humanized
and elegant with LCD display.
UPS Specification:
| Model | 1K-Li | 1KS-Li | 2K-Li | 2KS-Li | 3K-Li | 3KS-Li |
| Capacity | VA/W | 1kVA/900W | 2kVA/1.8kW | 3kVA/2.7kW |
| Topology | Double Conversion Online UPS |
| Phase | Single Phase Input Single Phase Output |
| Mains Input | Wiring | L/N+PE |
| Rated Voltage | 208/220/230/240VAC |
| Voltage Range | 90~300VAC |
| Frequency Range | 40Hz-70Hz |
| Input Power Factor | ≥0.99 |
| AC Output | Wiring | L/N+PE |
| Output Voltage | 208/220/230/240VAC |
| Voltage Regulation | ±1% |
| Output Frequency | 50/60±4Hz(Sync Mode) / 50/60Hz±0.1%(Free Run) |
| Waveform | Sine Wave |
| Distortion (THDV%) | <2%(Linear Load) |
| | <8%(None-Linear Load) |
| Over load capability | 100%~105% continuous. 60Sec.@105%~130% Rated Load 10Sec.@130%~150% Rated Load 0.3Sec.@>150%Rated Load |
| Efficiency | Line Mode | 88% | 89% | 90% |
| Battery Mode | 86% | 87% | 88% |
Battery & Charger | Rated Battery Voltage | 48VDC (default for 15cell of LiFePO4 ) |
| Battery Capacity | 600WH | External Battery Depends | 1000WH | External Battery Depends | 1000WH | External Battery Depends |
| Backup Time | >40mins @ Full Load | | >30mins @ Full Load | | >20mins @ Full Load | |
| Charging Current | 4A/8A |
| Charging Voltage | 52.8V(default for 15cell of LiFePO4 ) / Customerized according to
battery request |
| Charger Behavior & Protection | CC. CV. Floating. Turn-Off 4 states 3 over voltage protection loop, preserve interface for over
temperature/over pressure switch off interface |
| Physical | Chassis Style | RACK / Tower (separated) |
| Rack Dimension | 1K: 438x88(2U)X400mm 1KS: 438x88(2U)X400mm | 2K: 438x88(2U)X500mm 2KS:438x88(2U)X400mm | 3K: 438x88(2U)X650mm 3KS:438x88(2U)X400mm |
| Tower Dimension | C1KS/C2KS: 145×220×390mm C3KS: 190×318×365mm C1K: 190×318×365mm C2K/C3K:190×318×415MM |
| Weight(Tower) | 10.8kg | 5.0kg | 16.5kg | 5.5kg | 18.0kg | 7.9kg |
| Weight(Rack) | 12.5kg | 6.5kg | 21.6kg | 6.8kg | 24.5kg | 8.2kg |
| HMI | LED DISPLAY | Mains / battery status, Load level, battery level, Operation Mode |
| LCD DISPLAY with LED indicator | Input Mains Voltage, Frequency, Load level, Operation Mode, Health
Status |
| Standards COMMUNICATION | 1. RS232 PORT 2. Network Card: Support SNMP,TCP/IP Protocol , for remote monitor
the UPS via Smart Phone APP, Web page, PC Monitor Software ,
Support Server / NAS shutdown 3. Dry Contact Interface for BMS control |
Operating Environment Endurance | Temperature range | -10~50oC |
| Relative Humidity | 0-98%(Non-condensing) |
| Acoustics Noise | <55dB @ 1 meters |
Main Features:
Zero Transfer time
True Double Conversion Online UPS, provide most comprehensive
protect mission critical equipment from wide range power quality
issues
DSP Digital Control Based
Advance DSP base digital control bring high performance of high
input Power factor, low distortion , supply the load with perfect
sine wave AC power supply
Li-ion Battery Powered
Provide up to 3x backup time in 50% dimension, comparing with
regular Lead-acid UPS product
Dry Contact control Interface for BMS
Incorporated Dry Contact interface for BMS dominant control , for
control of charging and discharging base on relay in-depth BMS
information
ModBUS interface with BMS
Incorporated ModBUS(RS485) interface with BMS, to achieve precise
battery information (voltage/soc/soh, etc) for better UPS behaviour
prediction and backup protection control loop.
Li-ion Battery Charger
Constant current , Constant voltage, Floating, Turn-Off 4 state
charger for Li-ion battery , open to customize the logical behavior
for customer- specified battery pack
Ultra Wide Input Mains range
Strong compatible with ultra with electric environment, stay well
with ultra wide range mains of 90V~300V, 40~70Hz ,dramatically
reduce battery discharge , prolong battery life.
Best Loading Capability
Up to 0.9 Output Power Factor , 50/60 Hz Automatically adapting,
selectable voltage , perfectly match all kind of application
Genset Compatible
Capable of work with wide range of Genset, isolate fluctuation and
noise from Genset , provide stable and clean power supply to the
user equipment.
High Input power factor
Thanks to digital controlled PFC Technology, >0.99 input power
factor, effectively avoid power pollution , save energy expense for
customer
Reliable design
Made with strong Glass fiber base (FR4) double side PCB, company
with large span component, greatly improve reliability in harsh
environment, Well designed ventilation and conformal coating ,
avoid dust accumulation ,improve resistant to corrosion.
Open to customization
Based on powerful controller and open architecture, the product is
able to be customized to match need of integration of automatic
system or intelligent supervisory system
FAQ:
Q: What's your payment term?
A: We can accept T/T and L/C for standard order; West Union, Paypal
and T/T for samples are also acceptable.
Q. Do you have MOQ of the battery order?
A: Generally we request no MOQ to support every of our clients,
sample orders for testing are also welcome.
Q. How long will be the Lead time?
A: Detailed lead time depends on order quantity. Usually the lead
time for samples: 7-10 days, for mass production order: 10~20 days.
Q. How to deliever the goods and how long does it takes to arrive?
A: The goods are generally shipped by Express (UPS/DHL/TNT/FEDEX
etc). And we can also ship the battery by Air Cargo or by sea. It
takes 3-5 days by Express and about 30 days by sea.
Q. How to proceed with an order?
A: Step 1, let us know your detailed requirements of the UPS;
Step 2, we will quote according to your detailed requirements;
Step 3, pls confirm the prices and samples;
Step 4, pls place a formal order including detailed QTY and product
requirements;
Step 5, we provide the proforma invoice according to your order and
you pay 30% deposit of the order then we will arrange the
production;
Step 6, when the goods are ready, we will inform you to finish the
balance payment of the order and we will arrange shipment of the
goods when the payment is confirmed.
