FPBA-01 3ABD68469325 ABB PROFIBUS DP Adapter Module IP20 450 MA 12
Mbps
1. Product Overview
The FPBA-01 is an ABB-certified rack-mount fieldbus adapter
designed for the ACS355, ACS380, ACS480, ACS580, ACS850, ACS880,
and ACSM1 series. The module plugs directly into the drive's option
slot, requiring no external power supply. It enables
millisecond-level data exchange with PLCs (S7-300/400/1200/1500,
AC500, AC800M, etc.), supporting both PROFIdrive and ABB protocol
stacks, delivering both versatility and high performance.
2. Key Features
- Complete protocol: DP-V0 cyclic data + DP-V1 aperiodic parameter
channels, enabling simultaneous control and diagnostics over a
single network cable
- Full message coverage: Automatically identifies PPO1…PPO8,
Standard Telegram 1/2, and is compatible with mainstream
configuration tools such as STEP 7, TIA Portal, and SYCON
- High-speed baud rate: 9.6 kbps…12 Mbps, with automatic detection
and no relay required within 100 m
- Isolation design: Three-terminal isolation (power, bus, and
drive), ±15 kV ESD protection, and IEC 61800-3 EMC certification
- Three LED diagnostics: Clearly display HOST/MODULE/NETWORK status
and support remote fault notification
- Industrial-grade temperature resistance: -20…+60°C, IP20
protection, and an altitude of 2,000 m No derating required,
suitable for demanding applications such as plastics, textiles,
water, logistics, and food and beverage.
3. Technical Parameters
Interface: 9-pin D-Sub (RS-485), built-in 220 Ω termination
resistor, software-switchable.
Power: Powered by the drive's internal +3.3 V bus, typical 450 mA,
no additional wiring required.
Certifications: CE, UL, CSA, RCM, EAC, RoHS 2.0 compliant.
Lifespan: >100,000 hours (continuous operation at 40°C ambient
temperature).
4. Installation and Commissioning (3-step online operation)
① Turn off power → Insert module → Tighten two screws → Close
cover.
② Switch the bus start and end nodes to ON, and the middle node to
OFF; connect using shielded twisted pair cable.
③ Import the ABB GSD file (ABB_0812.GSD) into the PLC, select the
PPO type, download the hardware configuration → Restart →
Communication is successful if the green light remains on.
5. Typical Applications
- Conveying and Sorting: S7-1500 + ACS580 collaboration, 50-axis
synchronous positioning error < ±0.5 mm
- Constant Pressure Water Supply: AC500-eCo reads ACS880 outlet
pressure in real time via DP-V1, saving 18% energy
- Wind Turbine Yaw: ACSM1 servo connected to PROFIBUS via FPBA-01,
achieving 0.1° yaw accuracy and stable operation at -30°C
Product Images
Related Products
| 733A096B-2 | V18345-2010460001 |
| ABB CI861 3BSE058590R1 | AV2321000 |
| ABB DI810 3BSE008508R1 | 22/06-65 |
| PCD235 3BHE032025R0101 | STT-127N |
| PCD235 3BHE032025R0101 | OTR16T6M |
| PCD231 3BHE025541R0101 | SPAJ-115C |
| 3HAC160141/07 | 3HAC024385-001 |
| 750203/806 | 3HAC-14139-1 |
| GCE9401766P0106 | 3HAC-023278-001 |
| 3HAC15340-1 | 3HAC-15619-1 |
