High-Power Aluminum Liquid Cooling Plate Water Cooling Cold Plates
For Electronics
Electronic cold plates feature high heat dissipation efficiency,
precise temperature control, and the ability to adapt to complex
Spaces. They also have low noise and excellent energy consumption,
enabling efficient cooling of high-heat-generating components. They
are widely used in automotive electronics, communication equipment,
and other fields. It is mainly used to solve the heat dissipation
problem of high heat flux density components in automotive
electronic systems, as follows:
Heat dissipation for power semiconductor devices: In automotive
inverters, IGBT modules in controllers and other power
semiconductor devices, the heat generated is highly concentrated
planar Joule heat. The power is mainly concentrated on the bare
chips of tens to hundreds of square millimeters, and the heat flux
density usually reaches the level of 50-1000+W/cm². Electronic cold
plates can increase the heat dissipation area and enhance the heat
dissipation capacity by optimizing the flow channel design, such as
adopting structures like needle rib type, milled groove type and
welded fin type, to quickly remove heat. For instance, in the
refrigerant cooling system of a certain IGBT power semiconductor,
by rationally designing the pump flow rate and system pressure, the
dryness at the outlet of the cold plate can be controlled within
70%, and the chip temperature can be stabilized at around 83.36°C,
which is far below its maximum tolerance temperature of 125°C,
ensuring the reliability of the system.
2. Heat dissipation of battery management system: Although the heat
flux density of the battery system is relatively low, usually only
at the 0.1-1 W/cm² level, a large amount of heat is still generated
during fast charging and high-load discharge of the battery.
Electronic cold plates can be used for heat dissipation in battery
modules. For instance, by arranging large serpentine channel cold
plates at the bottom or top of the battery module, which are made
of thin stamping plates, the channel height is usually less than
3mm. This can meet the heat dissipation requirements while reducing
processing costs and installation space occupation.
3. Heat dissipation for other electronic devices: Electronic
devices such as on-board chargers and DC-DC converters in
automobiles also generate heat during operation. Electronic cold
plates can also be applied to the heat dissipation of these devices
to ensure they operate within a stable temperature range and
enhance the reliability and stability of the entire automotive
electronic system.
Product designing and manufacturing of New product optical fiber
water cold plate double fiber laser equipment water cold plate
Every products of heat sinks needs several process including the
drawing design, CNC machining, friction welding stir, soldering,
assembly, skiving and extrusion, Testing and finally turn to the
step in the surface treatment.
Product application of New product optical fiber water cold plate
double fiber laser equipment water cold plate
Our heat sinks and water cold plates has been utilized in many of
fields, including transportation, CPU computer, servers, Led light,
Laser equipment and air condition and so on as long as any
electrical product that generate the heat.
So when you are designing the thermal heat sinks or any radiators,
there must be some of them may be met your requirement.
Packing details of New product optical fiber water cold plate
double fiber laser equipment water cold plate
All the heat sinks, water cold plates and heat pipes are packed in
the EPE foam and in the carton, the carton itself has the strong
protection using the wooden frame for it and finally utilize the
Packaging transparent film as it is water proof, some of the larger
heat sinks or water cooling plate may adopt the wooden carton due
to the special demanding, wooden box inside has the thick EPE that
offer great protection from inside and outside knocking!
Our service
1.Once received the inquiry will be quickly replied
2.Keep the product be qualified and price be reasonable and
competitive.
3.Fastly arrange production and improve efficiency. Get the goods
be finished on time.
4.We can advice the best transportation depends on the goods weight
and cubic meter
5.Any questions with the goods we made, we will offer the best
solution and technique support.
FAQ
1. Q:Are you trading in company or manufacturer?
A:We are the professional manufacturer of heat sink and water
cooling plate
that has much experiences and strong technique team, automatically
and mechanized production
2. Q:Have you exported the goods before and to which regions?
A:60% goods in total has exported abroad, to Japan, India ,British,
Canada, America and Brazil.
3. Q:How many employees you have?
A:we have about 100 employees ,including sales, purchase
,engineering ,QA ,warehouse and production department.
4. Q:If I agree with the design, can you provide the samples we
need?
A:Yes,we can we surely will provide the samples to you for
confirmation before mass production. Meanwhile the drawing we could
provide if needed
5. Q:What packing you're using and can be assured safety?
A:Every goods are be packed with customized packing ways in normal
cartons with tight proof fabric and wooden cartons for great
protection,
so it is safe during transportation.
6. Q:If we have any questions with products, can you provide the
technique and solution?
A:Every products are fully checked before shipping, if there is
problems you're facing, please feel free to let us know, we will
offer best solution at once.
