Grinding and Screening Machine Ball Mill Cylinder Device Touch Screen Nano Grinder Sieving Mill Mill Sieve Machine

Introduction

The grinding and screening machine consists of a ball mill cylinder, a screening system, an input system, and an output system. During the grinding process, the material can be crushed by the ball mill and then screened. After reaching the desired particle size, the material passes through the screening system and is collected by the output system. The material is continuously fed into the machine through the input system. The grinding and screening machine is particularly suitable for materials that need to be ground to a specific particle size. For example, if you want to obtain materials within a specific range, such as 200-300 mesh, the grinding and screening machine is very suitable. Additionally, the grinding and screening machine also significantly improves the grinding efficiency and reduces unnecessary repeated grinding.

Crushing Principle

When the grinding and screening machine is in operation, the grinding media and the material rotate together with the cylinder and are lifted to a certain height. Due to the force of gravity, they detach from the cylinder wall and fall along a parabolic path. The material is crushed under the impact of the grinding media and the friction and shear effects generated by the rolling and sliding of the grinding media. The grinding and screening machine can be widely used in industries such as electronic materials, magnetic materials, biomedicine, ceramic glaze slurry, non-metallic minerals, and new materials.

Grinding and Screening Machine Ball Mill Cylinder Device Touch Screen Nano Grinder Sieving Mill Mill Sieve Machine