Vacuum Preservation Food Grade PP Plastic Pump Bottle Toothpaste
Logo Color Custom 100ml
♦Product Description:
Our 100ml Vacuum Preservation Food Grade PP Plastic Toothpaste Pump
Bottle integrates safety, freshness preservation, and customization
to elevate your daily oral care experience. Made from high-quality
food-grade PP plastic, it meets strict safety standards—non-toxic,
BPA-free, and safe for direct contact with toothpaste, ensuring no
harmful substances leach even during long-term use. Its core vacuum
preservation technology effectively isolates toothpaste from air
and external contaminants, preventing oxidation, bacterial growth,
and drying out. This not only maintains the toothpaste’s fresh
texture and active ingredient effectiveness but also allows you to
use every last drop, eliminating waste. The practical 100ml
capacity balances usability and portability: it’s roomy enough for
daily home use and compact enough to fit in toiletry bags for
travel, without taking up excess space. Additionally, we offer logo
and color customization options—you can print your brand logo, or
choose a color that matches your bathroom decor, personal style, or
brand identity. Whether for household use, hotel amenities, or
personal care brand product lines, this pump bottle combines
functionality and personalization to meet diverse needs.
♦Product Specification:
A. Primary Specification Properties
1. Material
| MATERIAL | MATERIAL DESIGNATION NAME | ALTERNATE MATERIALS |
| Base Material | Dispenser: 1. Spring: TPE 2. Piston: PE 3. Others: PP | N/A |
| Masterbatch | Standard white or customization | N/A |
2. Dimensional Requirements
1. General
1.1 Inspection condition Lighter: D65 Distance: 30CM visual
| Item | Description | Specification |
| 1 | Overall Height | 100ml | 182.2±0.80mm |
| 2 | Weight of dispenser (without Piston) | 100ml | 39.3g±1.0g |
| 3 | Weight of piston | 2.8g±0.2g |
| 4 | Over cap diameter | 39.60±0.40mm |
| 5 | Inner diameter of body | 37.60±0.15mm |
| 6 | Upper diameter of piston | 37.95±0.15mm |
| 7 | Weight of labels | TBD |
| 8 | Weight of sleeves | TBD |
Weight is excluding the sealing foil on the body |
B. Additional requirements
1.2 Must be free of dirt, grease, oils, or other foreign materials.
1.3 Parts must be free of flash, short shots, sink or other
imperfections that may affect functionality of the part or has
potential to cause injury.
2. Function test
2.1 Vacuum leakage test
After filling with toothpaste, put the finish part with holding
pressure u-0.03MPa, 10 minutes". The result is ok if there is no
leakage
2.2 Drop test
After filling with toothpaste, free drop from height 0.5M. The
result is ok if there is no crack on the body.
3. Decoration
- Shrinking sleeves inspection
- Ensure the color and artwork consistent with customer sample.
2) Printing color tolerance: AEab* M3.5
- Ensure the color and artwork consistent with customer sample.
2) Printing color tolerance: AEab* <3.5
C. Markings
- Mark each pallet clearly on the top and at least two sides with the
following minimum information:
- Supplier's name and address
- Quantity
c. Manufacturing date
d. Lot number
e. Order number
2.2 Or use the customization mark according to Customer
D. Storage Requirements
The products must be stored upon receipt from the supplier within
the original closed container, in a clean dry, well-aired store,
away from direct sunlight, humidity and sources of contamination or
foreign door and insect.
E. Certificate of Analysis
•Manufactured date, lot number, quantity , materials
•Includes measured visual inspection, key function test, and
critical dimension measurement result.
