Custom Low Price 1L Protection Atmosphere Inner Mixer
Product brief introduction
This internal mixer is constructed from imported full-alloy
materials, eliminating the need for spraying or electroplating. It
is designed for processing high-viscosity, high-hardness materials
such as powder metallurgy feedstock, ceramic powders, and titanium
or aluminum alloy powders, and is well-suited for internal mixing
and refining of diverse raw materials.
Technical Data
| CF-1LQF | CF-3LQF | CF-5LQF |
| Effective mixing volume(L) | 1 | 3 | 5 |
Batch Feeding
(depending on material) | 2-5Kg | 6-9Kg | 10-15Kg |
| Main Motor(KW) | 4 | 7.5 | 11 |
| Frequency Converter(KW) | 4 | Accept customization |
| Pressure Cylinder | ￠63 | ￠80 | ￠100 |
| Speed (front/rear) | 0 - 40/31r/ m | 0- 40/31r/m | 0- 40/31r/m |
| Heating Method | Electric heating | Electric heating | Electric heating |
| The Cooling Industry | Ventilation cooling | Water cooling | Water cooling |
| Pitch Diameter Of Screw Rod | 35mm | Accept customization |
| Weight(Kg) | 1200 | 2080 | 2500 |
Product Superiority
1. The inner chamber can be fully open,easy to clean without any
dead ends.
2. By adopting PLC control system to connect the preset values and
the detection values,with intelligentoperation to discharge the
oxygen contect in positive pressure,and recharge inert gas
automatically.
3. With double atmosphere protection device,the mixing process is
in the condition of positive pressure.
Mixing System
The mixing chamber is "W" shaped, and adopts an "M" shaped lower
pressure cover to form a fully enclosed mixing space. The stirring
blade adopts a prismatic spiral design without dead angles, so that
the material can be sheared and dispersed to meet the physical
property requirements. The stirring blade is a hollow structure,
and the part in contact with the material is made of imported
all-alloy material (no spraying or electroplating is required),
which is wear-resistant, corrosion-resistant, not easy to stick to
the material, and has a long service life.
Technical Advantage
1. CFine's anti-leakage powder device adopts mechanical shaft seal
tightening technology and uses self-lubricating seal rings to keep
the seal rings in a compressed and sealed state during the mixing
process. The self-lubricating seal rings can further reduce the
wear of the mixing system and more effectively reduce the noise
such as whistling caused by leakage and poor sealing. It can
greatly improve the anti-leakage powder function, making cleaning,
color change and disassembly simpler and more convenient, and
reduce the pollution to the materials.
2. This machine adopts a through-type heating system, which heats
faster and transfers temperature more evenly, and the heating
efficiency is 50% higher than that of traditional heating plates.
It adopts a PLC program control system.
3. The internal structure of the mixing chamber adopts a complex
tube-belt design, which has good heat exchange and precise
temperature control. The rotor is cooled by water, which
effectively prevents sticky materials and controls the temperature
precisely, making the materials dispersed more evenly.
After-sales Service
During normal use, non-consumable parts are guaranteed for one
year. We provide on-site installation guidance and long-term
technical support.
Note: Electrical components and motors are imported from Taiwan and
foreign brands.
