2.8 Inch Lcd Display Module Touch Screen 240 * 320 Dots Matrix SPI
Interface
Product Details
| Resolution: | 240 * 320 |
| Size: | 2.8 Inch |
| Viewing Direction: | 6 O ' Clock |
| TFT Mode: | TFT, Transmissive |
| Outline Size: | 50 * 69.20 * 2.3 Mm |
| Brightness: | 280 Cd / M2 |
Product Description
Specifications:
Item | Contents | Description |
1 | Product Name | 2.8 Inch TFT 240RGB x 320 Lcd Module |
2 | Module Size | 50 mm * 69.20 mm * 2.30 mm T |
3 | Resolution | 240 * 320 |
4 | Interface | SPI |
5 | Touch-Panel Type | RESISTIVE Or WITHOUT, CAPACTIVE |
6 | Interface Type | 16 Bit MCU |
7 | Colors | 65K |
8 | Controller / Driver | ST7789V |
| 9 | Light Source | 4 White LEDs in Parallel |
Structure Diagram:
Application fields
Consumer electronics: such as MP4 players, digital cameras,
portable game consoles, etc., provide users with excellent visual
experiences and convenient touch operations.
Industrial control: can serve as the display interface for
industrial instruments, control panels, etc., and display real-time
information such as equipment operation status and parameter
settings. Its high reliability and stable performance meet the
requirements of industrial environments.
Vehicle electronics: applied in vehicle navigation devices, driving
recorders, etc., providing drivers with clear route guidance and
vehicle information display. Touch operations are convenient for
use during driving.
Medical equipment: used as the display interface for medical
devices such as electrocardiogram machines, blood pressure
monitors, etc., helping medical staff quickly obtain patient
information and improving diagnosis and treatment efficiency.
FAQ:
1. I want the LCD display 8 digits and the outline size is
65x30x2.8mm………?
Answer: No problem. Firstly, please kindly send us your
specification/ drawing paper
If you have not the specification, you can also provide your samples; we will recommend the suitable
one
if it is standard products. Or we can customize for you based on
your own requirement.
2.This LCD is just what we want, but it is big size, do you have
any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the
outline size or display content,
a new LCD glass module is need. We have to open new tooling for you.
3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.
4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have
not, please advise me the outline size
of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.
5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing
paper confirmation and tooling charge payment,
we can report you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.
7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is
one day after payment. If it is the mass production for
special ones, the leading time is about 15-30 days. suppose we can
finish earlier, we will report the information in advanced.
