Full Automatic PCB Cleaning Machine High Efficiency Ultrasonic
Cleaner PCBA Water Cleaning Washing Machine with CE certificate
Description
Automatic PCBA Cleaning Machine
SME-5600 is an energy-saving, environmental protective, integrated,
high-end cleaning machine. It can automatically complete cleaning,
rinsing, drying process in one chamber by just push the start key.
Key Features:
1. The whole process visible : the cleaning process can be visible
through the front window and LED light.
2. Automatic cleaning mode: clean, rinse, dry process can complete
in one compact machine.
3. The most scientific nozzle design: the use of left and right
incremental arrangement --- to enhance cleaning efficiency,back and
forth movement of basket - completely solve the cleaning blind
area;
4. The nozzle pressure adjustable design: to solve the small and
light PCBA in the high pressure spray under the conditions of the
collision, splash problem;
5. The standard dilution tank heating system: greatly improve the
cleaning efficiency. Shorten the cleaning time;
6. A comprehensive cleaning system: for SMT; THT PCBA after welding
the surface of the residual rosin, water-soluble flux, no-clean
flux / solder paste and other organic and inorganic pollutants for
thorough and effective cleaning;
7. Convenient cleaning dilution to add: can be manually added, but
also by setting the ratio (5% to 25%) automatically with DI water
and chemical liquid (option).
8. Temporary tank and auxiliary heating system: Temporary tank is
used to store dilution and DI water.
During cleaning process, the air pump absorb dilution form dilution
tan and send to temporary tank ,then wash pump absorb dilution from
temporary tank to clean PCBA. After cleaning process, the air pump
absorb dilution from temporary tank and send them back to dilution
tank.
During rinsing process, the air pump absorb DI water from DI water
produce machine and send it to temporary tank, each time after
rinsing ,DI water will be discharged form temporary tank. The rinse
water can be heated as needed;
9. Lower operating costs: built-in filter makes the dilution
repeated used. By using compressed air blow method at the end of
cleaning process : blow the residual detergent off from pipeline
and the pump , which effectively save 50% dilution.
10. The concentration lqiuid compensation function: the
concentration of dilution will be getting lower and lower after
repeated use which will affect the cleaning effect and cleaning
efficiency of PCBA, at this time , need to add some concentrated
liquid to dilution tank to compensate the dilution concentration.
concentration compensation can improve the effective use of liquid,
the concentration liquid adding amount can be adjustable according
to the real situation.
DI Water Machine (DI-250)
If customer has no DI water then they need to buy one DI water
machine.
1. DI water machine is used to turn tap water into DI water and
supply to the PCBA cleaning for rinsing after cleaning.
2. DI water will be discharged after rinsing and normally need to
rinse 3~4 times after cleaning, each rinse will cost 20L DI water.
3. DI-250 DI water machine will produce 250L DI water in one hour.
4. DI-250 DI water outlet resistance is ＞10MΩ
Product Specification
| Sr. No. | ITEM | SME-5600 SPEC |
| 1 | Retangle Cleaning basket | L610 x W560 x H100(mm)x2 layers |
| 2 | Liquid tank capacity | 60L |
| 3 | Concerntrate liquid tank capacity | 30L |
| 4 | Temporary tank capacity | 18L |
| 5 | Clean time | 10~20min(0~99min adjustable) |
| 6 | Rinse time | 1~3min/times(0~10min adjustanble) |
| 7 | Hot air dry time | 15~30min(0~60min adjustable) |
| 8 | Rinse times | 3~5times(1~59 times adjustable) |
| 9 | Cleaning liquid temp | room temp~75℃ |
| 10 | Rinse DI water temp | room temp~75℃ |
| 11 | Hot air dry temp | room temp~99℃ |
| 12 | Liquid tank heater power | 9KW |
| 13 | Temporary tank heater power | 6KW |
| 14 | Hot air heater power | 7.5KW |
| 15 | Resistivity range | 0~18MΩ |
| 16 | Electric pump | 4.0KW |
| 17 | Air pump | 1 Inch |
| 18 | Liquid Spray pressure | 0~5kgf/cm2 |
| 19 | Liquid filter | 0.2um |
| 20 | DI water filter | 0.2um |
| 21 | Air vent size | φ100XH30(mm) |
| 22 | Power/air supply | AC380V,50/60HZ,65A /0.5~0.7Mpa,200~400L/Min |
| 23 | Machine size | L1300 x W1200 x H1850mm |
| 24 | Machine weight | 600KG |
Application
Car electronics PCBA, Military PCBA, Aerospace PCBA, Telecom PCBA,
Medical device PCBA, Digital meters PCBA.
For Rosin flux, No-clean flux,Water-soluble flux , Solder paste
ball and other organic and inorganic pollution materials on SMT and
THT PCBA.
