ASTM A213 T9 Alloy Steel Seamless U Bend tube For Power Generation Boilers

ASTM A213 T9 Alloy Steel Seamless U Bend tube For Power Generation Boilers

ASTM A213 T9 seamless U-bend tube is a high-strength, corrosion-resistant steel tube, manufactured without a seam, and bent into a tight "U" shape. It is specifically designed for use in the heat exchange sections of high-temperature and high-pressure equipment like boilers, superheaters, and heat exchangers in the power generation and petrochemical industries.

Here are some detailed breakdowns:

1. Tube’s Material: ASTM A213 T9

(1) ASTM A213 Grade T9: Chemical Composition

The chemical composition is the key to the material's high-temperature strength and corrosion resistance.

Note: The tube shall be heat treated to a minimum temperature of 1200°F (650°C) for subcritical stress relief, or full annealed, normalized and tempered, or normalized and tempered.

(2) ASTM A213 Grade T9: Mechanical Properties

These properties are the minimum required by the ASTM A213 standard for the finished tube after the final heat treatment.

Elongation Requirements: The minimum elongation is dependent on the wall thickness of the tube.

2. U Bend Tube

Purpose: This shape is fundamental to the design of U-tube heat exchangers. A bundle of these tubes is inserted into a tube sheet at the straight end. The U-bend allows the tube to expand and contract freely with temperature changes without stressing the shell of the exchanger. This eliminates the need for expansion joints.

Bending Process: The bending is a critical, precision operation. It is done cold (for smaller radii) or hot (to prevent cracking on tight bends) using specialized machinery. The bend radius is a key specification.

3. Key Characteristics & Advantages of A213 T9 Seamless U Bend Tube:

• High-Temperature Strength: Resists deformation and creep under load at elevated temperatures.
• Oxidation & Corrosion Resistance: The chromium content protects against scaling and corrosive flue gases.
• Excellent Heat Transfer: The seamless construction and specific alloy allow for efficient heat transfer.
• Thermal Expansion Accommodation: The U-bend design allows for thermal expansion, preventing stress buildup.
• Compact Design: A U-tube bundle requires less space than a straight-tube exchanger with similar surface area.

Primary Application: U-Tube Bundle Heat Exchangers

The U-bend design is not arbitrary; it serves a crucial engineering purpose. These tubes are the key element in Shell and Tube Heat Exchangers of the U-tube bundle type.

• How it Works: A bundle of these U-bend tubes is inserted into a cylindrical shell. The straight legs of the tubes are secured into a single tube sheet. One fluid flows inside the tubes, while another fluid flows on the outside of the tubes (shell side), transferring heat through the tube wall.
• Key Advantage of the U-Bend: The U-shaped end allows the tube to freely expand and contract with temperature changes. This eliminates thermal stress that would otherwise build up and destroy a rigid, straight-tube heat exchanger. This design is simpler and more reliable than designs requiring expansion joints.

Specific Industries and Equipment

1. Power Generation Boilers (Fossil Fuel, Biomass, Waste-to-Energy)

This is one of the most common and critical applications. Inside a boiler, different sections have different functions, and T9 tubes are used in specific high-temperature zones:

• Superheaters: This is the primary application for T9 tubes.
  • Function: To heat saturated steam from the boiler drum to a much higher temperature (becoming "superheated" steam).
  • Why T9? Superheater tubes are exposed to the hottest flue gases and the highest steam temperatures. The 9% Chromium provides essential resistance to oxidation (scaling) and corrosion from sulfur in the fuel. The 1% Molybdenum provides the necessary strength to withstand high internal steam pressure at these elevated temperatures (typically up to ~1100°F / 595°C) without creeping.
• Reheaters:
  • Function: To reheat steam after it has partially expanded through a high-pressure turbine, before sending it to a lower-pressure turbine.
  • Why T9? The service conditions are similar to superheaters, requiring the same combination of high-temperature strength and corrosion resistance.

2. Petrochemical & Refining Industry

Refineries use many heat exchangers in the process of distilling and cracking crude oil into various products.

• Process Heat Exchangers: Used for heating crude oil, process fluids, or other hydrocarbons.
  • Why T9? In services where the process stream contains sulfur compounds (sour service) and operates at high temperatures and pressures, T9's chromium content resists sulfidation corrosion, which would rapidly degrade a carbon steel tube.

3. Chemical Processing Industry

Similar to refineries, chemical plants use these tubes in heat exchangers for various reactions and processes that involve corrosive chemicals and high temperatures.

4. Waste Heat Recovery Units (WHRU)

• These systems capture heat from the exhaust of gas turbines, incinerators, or other industrial processes to produce steam or preheat feedwater.
• Why T9? The exhaust gases can be corrosive (containing sulfur, chlorides) and at high temperatures. T9 tubes offer a cost-effective balance of performance and durability in these environments.

​

​

Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories,  the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always.   The factories already got certificates like : ABS, LR, DNV-GL, BV, KR, CCS, ASME, ISO 9001, ISO14001, ISO18001, ect.

Our factories main products as below : 
Factory 1th: Stainless steel seamless tube, Duplex steel seamless tube, Super duplex steel seamless tube, Nickel alloy steel seamless tube;

Factory 2th: Carbon steel seamless tube, Alloy steel seamless tube; Enhanced Heat Tranfer Tube, low fin tube ,U bending workshop;
Factory 3th: High frequency welding fin tube(HFW fin tube, Solid Fin tube, Studded Tube, Serrated Fin tube, Longitudinal welding fin tube), Wound fin tube(L type fin tube, LL type fin tube,  KL type fin tube), Embedded G type fin tube , Extruded fin tube,  low fin tube, U bend & 180deg. Return;

Yuhong Holding Group also has gained rich experience for project package( products contain:Pipes, Fittings, Flanges, heat exchanger, furnace, fired heater, air cooler, boiler) , YUHONG brand has marked its global presence in more than 85 countries, like, Korea, USA, Canada, Mexico, Colombia, Bolivia, Chile, Argentina, Brazil, Ecuador, Austria, New Zealand, Singapore, Malasyia, Indonesia, Thailand, Vietnam, Ukraine, Turkey,Sauid Arabia, Qatar, U.A.E,Israel,India, UK, France, Italy, Gernmany, Poland, Spain,... We have successfully implemented the orders of Cross Country Pipelines for our valuable customers. In addition, we have also developed a huge network of contacts and strategic alliances with most important manufacturers as stockists around the world.