CFN Brand Front Stabilizer Bar Split Bushing for Tesla Model S (2012–2015) | 1188487-00-D

Product Overview

Key Features & Benefits

1. Exact Fit for 2012–2015 Model S

• Mirrors the OEM bushing’s inner diameter (to match the front stabilizer bar) and outer contour (to fit suspension brackets)—no trimming or modification needed.
• Split design allows easy installation without removing the entire stabilizer bar (saves hours of labor vs. non-split generic bushings), aligning perfectly with the Model S’s front suspension layout.

2. Durable, Suspension-Grade Material

• Compound: High-density EPDM rubber (same as OEM) with a reinforced inner lip—resists wear from constant stabilizer bar movement, and stands up to road salt, oil, and extreme temperatures (-40°C to 100°C).
• Flexibility & Rigidity Balance: Maintains enough flexibility to absorb vibration (reducing road noise in the cabin) while staying rigid enough to prevent stabilizer bar “play”—critical for tight steering and minimal body roll.

3. Restores Suspension Performance

• The stabilizer bar (anti-roll bar) relies on this bushing to stay anchored: a worn bushing lets the bar shift, causing imprecise steering and increased body roll (especially during highway turns or lane changes).
• Fixes common issues like front-end clunking over bumps, “loose” steering feel, or uneven weight distribution during braking—brings back the 2012–2015 Model S’s original smooth, controlled ride.

Specifications

Installation Guide

1. Safety Prep: Lift the vehicle and secure it on jack stands (never rely on a jack alone). Remove the front wheels to access the front suspension.
2. Locate the Bushing: Find the front stabilizer bar (runs across the front frame); the split bushing is clamped to the bar and mounted on a suspension bracket.
3. Remove Old Bushing: Loosen the bracket’s clamp bolts (use a socket wrench) and slide out the worn bushing—clean the stabilizer bar and bracket to remove dirt or old rubber residue.
4. Install CFN Bushing: Open the split bushing and wrap it around the stabilizer bar (align the inner lip with the bar’s groove), then reposition the bracket over the bushing. Tighten the clamp bolts to 18 N·m (per Tesla specs) to secure the bushing.
5. Test: Reinstall the front wheels, lower the vehicle, and take a short test drive—check for reduced body roll, no clunking noises, and tighter steering response.

Compatibility Note

Why Choose This Bushing?

• Split design cuts installation time: no need to disassemble the entire front suspension (DIY-friendly for home mechanics).
• OEM-grade EPDM rubber ensures long life—avoids frequent replacements from premature wear.
• Restores the Model S’s signature smooth handling, making highway drives and turns safer and more comfortable.

Company Profile

       Guangzhou Fuheng Auto Parts Supply Chain Co., Ltd., located in the Guangzhou auto parts business district, adheres to the business philosophy of "quality first, pragmatic innovation, service-oriented, and co creation and win-win", and has established the independent brand "CheFuning". The Che Funing brand regards human resources as the foundation of the enterprise and attaches great importance to the construction of the talent team; The Che Funing brand regards product quality as the life of the enterprise, and every single product from screws to accident parts is carefully selected.

 The CheFuning brand helps partners transform from traditional fuel vehicles to new energy vehicle models, expands from a single horizontal vulnerable parts operation to a new energy full vehicle parts channel enterprise, upgrades from regional chain stores to independent brands of new energy full vehicle series, standardizes the operation of independent brands in the new energy industry, and integrates resources to reduce costs and increase efficiency, occupying the commanding heights of enterprise management.