Customized 380V End Fired Furnace Refractory Material Glass Furnace
With Natural Gas Burner
1.Brief Description
An End-Fired Furnace (is also called as End-Port Furnace or
Horseshoe-Fired Furnace) is an industrial thermal processing unit
where combustion burners are positioned at one or both ends of the
furnace chamber. The hot gas flow from combustion moves along the
furnace direction, transferring heat through a glass melting
furnace designed with longitudinally arranged combustion ports and
a U-shaped flame path.
The end fired furnace has a small flame coverage area, the flame
reversing brings periodic temperature fluctuation and hot spot
movement.
In addition, the number of port limits the furnace width and
furnace scale. End fired furnace is suitable for making all kinds
of hollow products (bottles, jars, vessels, chemical instruments,
bubble shells, glass tubes, etc.), pressing products and glass
balls without special requirement on the quality of glass.
Its typical melting capacity is 30 – 500 t/d, in some cases up to
700 t/d can be achieved. Limitations in furnace size result from
flame length and crown span width, especially of the burner ports.
JEFFER Engineering has designed and supplied the end-fired furnaces
for the customers in China and aboard.
2.Type of Furnace
| Description | Specification |
| Fired furnace | The combustion fuel can be natural gas, heavy oil, diesel oil…… for
this kind of furnace. |
| Electric furnace | Electricity is the fuel for this kind of furnace. |
| Fired-electric furnace | This kind of furnace is mainly using combustion fuel, electricity
is used as a supplementary heating source. |
3. Heating Energy of Furnace
We can supply different kinds of heating type furnace. Including:
- Natural gas
- Heavy oil
- Electricity
- LPG
- Coal gas
- Light diesel oil for stand-by
4.Furnace Structure
- Glass melting section
- Heat source supply section
- Dog house
- Cooling section
- Waste heat recovery section
- Gas supply and waste gas exhaust
5. Supply Equipment and Materials
| Item | Description |
| 1 | Refractory materials |
| 2 | Combustion equipment |
| 3 | Mechanical equipment |
| 4 | Electric equipment, instrument, and automatic control equipment |
6. Technical Advantages
| Item | Description |
| 1 | 3D modeling design |
| 2 | Single/double/multi pass regenerator |
| 3 | Chimney located at the top of regenerator |
| 4 | Unique port structure |
| 5 | Deep refining technology |
| 6 | Unique throat cooling structure |
| 7 | Optimized tank wall cooling arrangement |
| 8 | Underport burner firing technology |
| 9 | Separate regenerator chamber technology |
| 10 | Electrical boosting technology |
| 11 | Bubbling technology |
| 12 | Intelligent single/dual fuel combustion system |
| 13 | Rich oxygen combustion technology |
| 14 | Full oxygen combustion technology |
| 15 | Induced draft fan exhaust technology |
| 16 | Injector fan exhaust technology |
| 17 | Key structure pre-assembly before delivery |
| 18 | Low energy consumption and long life technology |
| 19 | Advanced and reliable computer automatic control system (PLC/DCS,
SCADA) |
| 20 | Low environmental impact |
| 21 | Flue gas treatment technology |
| 22 | Waste Heat recovery technology |
FAQ
Q: Who we are?
A: JEFFER Engineering and Technology Co., Ltd is a professional
engineering company specialising in project design, engineering
technology consulting, engineering, procurement, construction
(EPC), and project operation management.
Q: Can you customize the products?
A: Yes, we have an experienced professional team ready to make
design according to the requirement of customers.
Q: Do you offer installation on site overseas?
A:Yes, we can provide our engineer to supervise the installation
work on site or provide the the whole installation team on site to
finish the project.
Q: Confidential protection provide?
A: Strict drawing management system eliminates the risk of the
leakage and protects your interests.
