Heat Pump High Temperature Dehumidifier
Product Features
With integrated structure design, can be still get excellent
dewatering effect in 65 °C hot air circulation working environment.
The drying room’s inside humid hot air will be send to the units
return air pipe and flow into the unit through the negative
pressure circulating fan; Through the high temperature side of the
heat exchanger (heat release), First time to lower the air
temperature and to increase the relative humidity rate for the unit
cubic water; Then the air temperature will be lowered in Second
time through the surface cooler. At that time, the relative
humidity rate of the air already close to its own dew point
temperature. Then Pass the evaporator to lower the temperature
thirdly and To realize condensation and dehumidification after
dehumidification,The moisture will be discharged from the water
tank and drain pipe which are on the bottom of the evaporator.At
this time, the circulating air becomes into a kind of
low-temperature drying type cold air because of the condensation
and the Relative humidity is reduced.Pass the air hose and back to
the low temperature side(heat absorption) of the Full-effect heat
exchanger.Then the high temperate and lower temperate exchange the
heat.Makes the low-temperature cold air be heated first time and
reduce the air relative humidity(heat recovery)Again pass though
the condenser.To increase the air temperature and reduce the air
relative humidity. Make it reach the temperature for dryer room use
and form into the hot dryed air .Then be extracted by the
Centrifugal fan and send into the dryer room
Dried Material Applications
It is applied to the extraction of flower cell liquids such as
roses, honeysuckle, jasmine, gardenia, etc.; valuable spices such
as agarwood, sandalwood and other incense products with closed room
dehumidification and drying; ginseng, notoginseng, gastrodia elata,
angelica and other cell liquid extraction, can get both dry
products and Cell liquid.
Technical Advantages
- Temperature control: 30-65 °C adjustable;
- Humidity control: 10-99% RH adjustable;
- Dehumidification: In the working condition with temperature 55 ° C
and relative humidity 70%, the average dehumidification is 22KG /
hour;The machine will adjust the Fan's air pressure and air speed
- automatically according to the temperature and Humidity.
- Adpot Negative pressure Hot-air circulation Drying Mode ,with
excellent drying uniformity;
- Use Closed room heating-up dehumidification mode.Heating is very
fast. and does not exchange air with the outside environment,which
makes sure the drying materials with stable quality, clean,
hygienic,
- energy saving and environmental protection in the processing of
drying.
- It can realize full-processing with closed-room high-temperature
dehumidification and reduce the loss of beneficial substances in
materials.
Technical Specifications
机组型号Unit Model | 压缩机功率 Compressor Power | 输入功率 Power Input (KW) | 制热功率 Heating Power (KW) | 额定温度 Rated Temperature | 额定电压 Rated Voltage (V) | 额定电流 Rated Ameter (A) | 环境温度 Environmental Temperature(℃) | 工质充注 Working Fluid Charge(KGS) | 噪音分贝 Sound Level (DB) | 外形尺寸 Machine SizeW*L*H(MM) | 重量 Weight (KG) |
GFM-CP-15 | 6P | 4.2 | 14 | 60/65 | 380 | 10.5 | 5-45 | 4.2 | 55 | 1810x1300x2000 | 480 |
GFM-CP-30 | 12P | 9 | 28 | 60/65 | 380 | 21 | 5-45 | 8.5 | 55 | 1810x1300x2000 | 660 |
High Temperature Heat Pump System Principle
The high temperature heat pump consists of compressor, condenser,
throttling device and evaporator. The refrigerant absorbs air heat
from the evaporator, transforming from low pressure liquid to
steam, then pressurized into high temperature steam by the
compressor. In the condenser, the refrigerant releases heat and
condenses into high pressure liquid. The throttling device reduces
pressure and temperature, completing the cycle that transfers low
temperature heat to high temperature medium.
Process Display
Company Information
Gofun Company offers comprehensive turnkey solutions for tomato
paste production lines and processing/packaging lines for various
fruits including apple, pear, peach, mango, and apricot. Our
machines have been successfully exported worldwide to Asia, Africa,
South America, Europe, and North America.
We are dedicated to developing exceptional food machinery and
contributing to the global agricultural industry, fostering
mutually beneficial relationships with partners worldwide.
Our Services
- Technical support
- Marketing suggestion
- Final packing suggestion and design
- Factory building and design
- Oversea technical support
- Oversea equipment maintenance
- English speaking engineers available
