Disc pelletizer granulation production line
The simplified disc granulator granulation production line is
generally used for a small number of raw materials, generally less
than 2 kinds of raw materials, and the ingredients do not require
strict proportion requirements. The main equipment of this
production line is the disc granulator and drying equipment.
Because the disc granulator uses water spray granulation, the
granules produced contain high moisture, which requires drying
equipment to remove.
Processing mineral powders (such as calcium carbonate, talc, and
bentonite) into granules through disc granulation is a key process
for addressing issues such as dust generation, low transportation
efficiency, and inconvenience. The "Simplified" solution, centered
around low cost, high adaptability, and ease of operation, focuses
on core functions and simplifies non-essential auxiliary systems.
It is suitable for small to medium-sized production capacities
(typically 10,000-50,000 tons/year) with moderate requirements for
granule quality, such as fertilizer carriers, building material
supplements, and feed additives. The following describes the
production line's composition, process flow, key parameters,
advantages, and considerations.
Application case diagram of Disc pelletizer in production process
Main equipment of fertilizer production line:
equipment | Key parameters | Adjustment principles |
Disc granulator | Diameter 1.8-2.5m, speed 15-20r/min, inclination 35°-55° | High production capacity demand → choose a large diameter disc;
mineral powder is very sticky → reduce the speed and increase the
inclination angle; low viscosity → increase the speed and reduce
the inclination angle |
Screener machine | Mesh aperture 0.8-3mm, vibration frequency 1500-3000 times/min | Small particles required → small sieve holes (0.8-1.5mm); large
particles required → large sieve holes (2-3mm); low vibration
frequency → slow screening but not prone to clogging |
Binder addition amount | 3%-8% (mass ratio of mineral powder) | Talc powder, calcium carbonate powder (weak viscosity) → 5%-8%;
bentonite, kaolin (strong viscosity) → 3%-5%; "non-scattering
particles and non-sticking to the plate" as the standard |
Granule packaging machine: It adopts automatic bag sewing machine, and can also be replaced
with manual bag folding and sewing according to needs.
The main advantages of fertilizer production line:
①The production line adopts Disc pelletizer, which is easy to
operate and can be operated without professional training.
② The use of flexible belt conveyor equipment maintains the integrity
of the particles and does not destroy the particle structure during
the conveying process.
③The overall structure adopts one-button start and stop, which is
easy to operate and maintain.
④ It adopts 3-bin automatic batching equipment with high batching
accuracy, keeping the error within ±0.2%.
FAQ:
Q: What is the application of the Organic Fertilizer Granules
Production Line?
A: The Organic Fertilizer Granules Production Line is primarily
used for the granulation of organic wet raw materials.
Q: What are the typical raw materials used in this production line?
A: The raw materials used in the Organic Fertilizer Granules
Production Line include compost manure, farm waste, city garbage,
and other organic materials.
Q: What is the capacity range of this production line?
A: The capacity of the Organic Fertilizer Granules Production Line
ranges from 1 to 20 tons per hour.
Q: What is the maximum allowable humidity level for raw materials
in this production line?
A: The maximum allowable humidity level for raw materials in the
Organic Fertilizer Granules Production Line is ≤30%.
Q: Is this production line automated?
A: Yes, the Organic Fertilizer Granules Production Line is fully
automatic, minimizing manual intervention and maximizing
efficiency.
