The Oil Jet 06E103158K Is Mainly Compatible With 1.8T/2.0T Models Of Audi (Such As A4/A5/Q5), Volkswagen (Such As Golf/Magotan/Tiguan) And ŠKoda (Such As Superb/Octavia) Brands From 2008 To 2019 Which

94810727103 Engine Oil Cooler for 2008 2009 2010 Porsche Cayenne V8 4.8L

I. Core Adaptation Scope Inference

1. Brand and Model Series

• Audi:
  • A4 (B8 platform): 2008–2016 model years (1.8T/2.0T models)
  • A5 (8T platform): 2007–2016 model years (1.8T/2.0T models)
  • Q5 (8R platform): 2008–2017 model years (2.0T models)
• Volkswagen:
  • Golf: 2009–2019 model years (1.8T/2.0T models)
  • Magotan: 2010–2016 model years (1.8T/2.0T models)
  • Tiguan: 2009–2016 model years (1.8T/2.0T models)
• Škoda:
  • Superb: 2009–2015 model years (1.8T/2.0T models)
  • Octavia: 2013–2020 model years (1.8T/2.0T models)

2. Engine Models and Displacement

• Applicable Engines:
  • EA888 Gen2 (2009–2016): 1.8T (e.g., CAEB/CLXA models), 2.0T (e.g., CBFA/CBFB models)
  • EA888 Gen3 (2012–2018): 1.8T (CUVA), 2.0T (CUGA/CZGA)
• Displacement Coverage: 1.8L turbocharged and 2.0L turbocharged.

3. Technical Adaptation Logic

• Function of Oil Jet:
  Installed at the bottom of the engine cylinder block, this jet cools piston skirts and rings directly via high-pressure oil jets — critical for reducing piston temperature under high-load conditions (e.g., rapid acceleration, high-speed cruising) to prevent abnormal wear and oil consumption.
• Characteristics of EA888 Engines:
  The EA888 series uses a modular design, with differences in piston cooling systems across generations. 06E103158K is optimized for Gen2/Gen3 piston cooling needs and is compatible with supercharged (e.g., Audi S3) or turbocharged models.

II. Parts Coding and Adaptation Verification

1. Analysis of Coding Rules

• 06E: Indicates the parts prefix for Audi models (per Volkswagen Group coding rules, the first three digits represent model/unit number; 06E corresponds to Audi’s B8 platform and derivatives).
• 103: Refers to the main engine group (the 4th digit "1" denotes "engine"; digits 5–6 "03" correspond to subsystems like cylinder blocks and heads).
• 158K: Denotes the part serial number and revision identifier ("K" may signify material or design optimization).

2. Suggestions for Adaptation Verification

• Official Query Tools:
  Enter the part number in the ETKA system (Volkswagen Group’s electronic parts catalog) to directly link to vehicle VIN codes, engine models, and model year ranges.
  Example: Search "06E103158K" in ETKA — if results show "Applicable to EA888 Gen2 2.0T engine", it confirms compatibility with 2010–2016 Audi Q5 2.0T models.
• Engine Model Label:
  Check labels on the engine cylinder block or valve cover — models like CAEB (1.8T) or CBFA (2.0T) match this jet directly.

III. Typical Failures and Maintenance Suggestions

1. Common Failure Modes

• Jet Clogging: Long-term use of low-quality oil or neglected maintenance causes sludge buildup, impairing cooling and leading to piston overheating or scuffing.
• Insufficient Injection Pressure: Oil pump wear or oil circuit leaks reduce jet pressure — check the oil pressure sensor and pipelines simultaneously.

2. Replacement Cycle and Precautions

• Preventive Replacement: Recommend replacement after engine overhaul or when the vehicle travels 100,000–120,000 km, especially for models with severe oil consumption.
• Supporting Maintenance:
  • Replace the oil filter and oil simultaneously during jet replacement, and use special tools to clean oil passages.
  • For EA888 Gen2 engines, upgrade to improved piston rings (e.g., 06E103469H) to reduce oil consumption.

IV. Industry Data and Verification Cases

• Market Feedback:
  In the European aftermarket, ~30% of EA888 engine failures caused by piston cooling design flaws relate to oil jet clogging/failure — annual replacement volume of this jet exceeds 150,000 units.
• Maintenance Manual Reference:
  Audi’s official maintenance manual (e.g., ELSAWIN) specifies that EA888 Gen3 engines produced after 2012 require 06E103158K or its replacement 06E103158L to address early-stage jet wear.

V. Summary and Suggestions

1. Official Query: Use the ETKA system or dealer databases with the part number and VIN code.
2. Physical Verification: Check the engine model label or disassemble the oil pan to inspect the jet (original jets usually have "06E103158K" laser engraving).
3. Upgrade/Replacement: For oil consumption issues, consider replacing with 06E103158L (optimized sealing) or 06E103158M (enhanced injection pressure).

Boigevis trading （GuangZhou）Co., Ltd is a company specializing in the sale of engine parts. Our main service models are Germany car.
We have been focus on engine parts for many years and are the Leading global engine system integrator. Both research and development and sales are among the best in domestic counterparts and enjoy a good reputation in the industry. We have an international high-level management system and after-sales service system, as well as a professional team service, serving every customer one-on-one. Since its establishment, the company has always adhered to customer-centered technology development; the corporate philosophy of continuous innovation; and the corporate mission of making maintenance easier and employees happier.
German Boigevis is a International Brand. Boigevis partner factories are international brands, among them one of the partners is a company with a professional production chain with the world's top international manufacturing level, which is a listed company in China. Currently has 15 foreign and agents.
Our products are sold to more than 40 countries and regions. Such as Europe, Asia, Africa,South America, North America and Australia etc. It is a stable product supplier for more than 120 foreign trade companies. As a professlonal engine parts suppliers, most of our parts are in stock that we can deliver within 24 hours after payment! In addition, we can provide customized services for product materlals and specifications. Sincerely look forward to working with you to create a better tomorrow.