SZAGS provides global users with a full set of industrial
refrigeration equipment solutions and supporting projects. Its main
products include environmentally friendly freezers, screw freezers,
low-temperature freezers, oil coolers, hot and cold temperature
controllers, laser chillers, PCB special chillers and other series
with thousands of varieties. They are widely used in rubber and
plastics, pharmaceutical chemicals, electronic circuits,
electroplating and coating, printing plate making, beverage and
daily chemical industries.
The cleanest and most recommended method of cooling is using a
plastics 0RT chiller. A plastics chiller is a refrigerated device
that cools plastics throughout the manufacturing process.
Nominal cooling capacity is according to:
Inlet chilled fluid temperature:17℃, Outlet chilled fluid
temperature: 12℃.
Inlet cooling air temperature: 30℃, Outlet cooling air
temperature:35℃.
The temperature range of chilled fluid is from 5℃ to 35℃.
The air cooled chillers are better to run while the ambient
temperature is below 40°C.If not, the chillers will have high
pressure alarm.Air-cooled chillers designed for high ambient
temperatures are excluded.
Benefit of Process Chiller Applications
A chiller provides consistent temperature and pressure to your
industrial process. Eliminating temperature and pressure variables
simplifies the process development and optimization, ensuring the
highest quality product. Instead of a wasteful, single-pass-through
system, a chiller recirculates the cooling water.
Please tell these basic information so we can better quote you
1. your supply voltage (for example: 3PH220V60HZ)
2. the outlet and intlet water temperature of the chiller
3. cooling capacity you need
How to ensure your product with good quality?
1. Since 2004, we specialize in the production of industrial
chiller, located in Shenzhen, China, our quality priority. All
products go through a rigorous multi-inspection process to give
customers multiple guarantees, and most accessories are made from
world-class brands such as Danfoss, Copeland, Schneider Electric
Components, etc.
2. After the installation of the industrial chiller, we will fill
nitrogen for 24 hours of pressure maintaining test to check whether
there is leakage in the cooling system of the chiller.
3. During the chiller test, we will provide test videos and
pictures.
4. After the completion of testing and commissioning of the
chiller, the chiller unit shall be cleaned and labeled, and then
inspected before leaving the factory. The chiller shall be packed
with plywood to ensure that the chiller is in good condition during
transportation.
