High-Pressure Quantitative Hydraulic Gear Pump with Up to 500 l/min Flow Rate and 1000 cc/rev Displacement

PGH5-2X/100RE11VU2
PGH5-2X/063RR11VU2
PGH4-2X/080RR07VU2
PGH4-2X/050RF11VK0
PGH5-3X/100RR11VU2 Quantitative high-pressure industrial hydraulic pump, original from Rexroth, Germany

FAQ:

• Cavitation: As above, cavitation can also cause pressure fluctuations and must be addressed by ensuring proper suction conditions.

Q7: What should I do if the pump is overheating or unusually noisy?

• Overheating: Ensure the fluid viscosity is correct, the system cooler is functioning, and the pump is not overloaded. Check for restrictions in the discharge line.

• Noise/Vibration: This can indicate cavitation (check suction side), air in the fluid (bleed the system), mechanical wear in bearings or gears, or misalignment between the pump and drive motor. Correct the alignment if necessary.

Q8: What are the essential maintenance practices for PGH gear pumps?

• Regular Inspection: Perform visual checks for leaks, unusual noises, and overheating.

• Fluid Maintenance: Use clean, recommended fluid and monitor its condition. Regularly check and replace suction and pressure filters.

• Lubrication: Ensure bearings are properly lubricated according to manufacturer specifications.

• Seal and Connection Check: Inspect shaft seals and pipe connections for leaks and tighten or replace them as needed.

• Alignment Check: Periodically verify the alignment between the pump and the drive motor.

Q9: Can I get assistance with technical issues or order replacement parts?

Yes, most suppliers and manufacturers offer technical support. For genuine replacement parts (e.g., seals, gears, bearings) and specific troubleshooting guidance for your PGH model, it is recommended to contact the supplier or Bosch Rexroth directly.

Q10: What are the typical warranty terms and production lead times?

Warranty terms can vary by supplier but are often around 60 days for new units. Standard production lead times for MOQ quantities are typically around 15 days, but this can vary based on the product and order size. Always confirm these details with your supplier.

Quanzhou Yisenneng Hydraulic Electromechanical Equipment Co., Ltd. has been established for many years and has now developed into an international trading company supplying various hydraulic machinery parts, oil pumps and valves. We are one of the few Chinese companies with multiple products and channels. Main focus: quality assurance! The price is the lowest in the industry! Quality management procedures are implemented in accordance with international standards and are implemented throughout the production process. In terms of channels, we have gathered the most complete variety of products in the world; in terms of quality, all products meet international standards; the lowest price in the industry is the highest; the fastest delivery on credit, and a complete after-sales system; remember Good service is the key to cooperation with customers. We strive to achieve high quality standards, provide competitive prices, and ensure timely delivery. In this way, our products have been recognized by the market and satisfied by customers in the past years. Our goal is to meet the needs of our global customers. Here you can enjoy a one-stop shopping experience, the customer is God, you want all of us, I wish you a happy shopping trip.