Epoxy resin adhesive DY-E705istwo component steel epoxy adhesive. It is developed by advanced
worldwide well-known environmental-friendly technologies with
imported main raw materials and has following advantages: low odor,
fast curing at room temperature. High adhesion and easy to use.
Resistant to acid, oil, salt water. Alkali, solvents and corrosion,
good adhesion to almost all substrates.
Technical Parameters
Color
Cured Color
Viscosity
(CPS)(25°C)
Mixture
Open Time/100g
Curing Time
(25°C)/100g
Tensile Shear Strength
(St-St)
Heat Resistance
°C
Shelf Life
(25°C)
A:black
Light Black
A:>100000
1:1
5 Minutes
Initial curing
5-10 Minutes
≥16 MPa
-60 to +100
12 months
B:milky white
B:>100000
Full curing
12 hours
Application Method
(1). Surface of adherent has to be cleaned, dried.
(2). A/B components should be mixed 1:1in weight in proper amount. Usually, initial curing can be reached
within 5-10Minutes(25°C) and available in 1 hours. full Bonded
joint can be used after 24 hours.
(3). After bonding the product, according to the requirements of
the bonding process on the treatment, so as not to affect the
effect.
(4). This product is partial thick, will be a normal phenomenon and
does not affect the bonding effect.
Application
Application
(1). Automobile, motorcycle water tank, fuel tank, oil, carburetor,
cylinder head, drain, drive bearing sleeve manufacturing and
repair, plastic parts such as baffle, handle.
(2). Decoration industry: metal, wood, plastic and building on the
aluminum frame, door frame, staircase protection board bonding,
advertising signs and the production of fixed, marble and wood
bonding.
(3). Stone processing industry: all kinds of marble, marble
bonding, than the silica gel curing time to be faster, easy to
operate.
(4). Elevator industry: elevator stainless steel sheet and the
adhesion of the ribs.
(5). Furniture manufacturing industry: plastic, metal decorative
strip and panel bonding, wood fixed, marble and wood fixed.
(6). Handicrafts, toys, all kinds of jewelry manufacturing
industry: ceramic crafts, glass products, shellfish crafts, hair
clips and other decorations bonding.
(7). Luggage, footwear industry: luggage box metal or hard plastic
plus or decorative strip fixed, boots with hard PVC plastic and PO
plastic bonding.
(8). Electronic manufacturing industry: electric motor, magnetic
motor magnet on the bonding.
(9). Manufacture of sports equipment: skateboard, fitness equipment
installation fixed.
(10). Machinery manufacturing industry: a variety of mechanical
parts of the repair, fixed, wear-resistant alloy installation.
(11). Lighting manufacturing industry: all kinds of lighting parts
installation.
(12). Chemical pipeline, liquefied gas pipeline plugging repair.
Hunan Baxiongdi New Material Co., Ltd. was established in 1999. 25
years professional manufacture experience, we become one of the
largest manufacture on adhesive in Changsha city Hunan China.
Our main products are including RTV silicone gasket maker, liquid
nails adhesive, threadlocker sealant, modified acrylic adhesive,
epoxy adhesive and 502 super glue. They are well approved by SGS,
ROSH, ISO9001. OEM are welcomed.
We’d like to cooperate with customers from all over the world based
on mutual-benefit. We always put “Customers First” in our mind and
commit ourselves to providing high quality service to all reliable
and esteemed international partners and clients.
