High Manganese Steel RC Hammer 3-5.5inch for Exploration Drilling and Grade Control

RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc

Especial suitable for complicated formation (Formation loose, difficult to drilling and unstable of hole wall), exhausting for deep hole, environment protection.

- Manufactured using premium hardened metals for long life;
- Maximum material recovery, up to 98%;
- No cross contamination of samples;
- Handles injection of water, foam, oil, and polymers without performance loss;
- Delivers maximum drilling under water.

RC hammer specifications:

SOLLROC RC bits sizes.

- RC bits 86mm -102mm for 3" RC hammer RE531

- RC bits 114mm -127mm for 4" RC hammer RE004

- RC bits 121mm -133mm for 4.5" RC hammer RE542/RE543

- RC bits 124mm - 138mm for 5" RC hammer RE545/PR40

- RC bits 133mm - 146mm para 5.5" RC hammer PR52/RE547/PR54/MX5456

We adjust button number, button configuration, button diameter to get ultra performance and reduce the drilling cost for you according to your rock formation situation.

- 3" RC hammers model RE531

- 4" RC hammers model RE004

- 4.5" RC hammers model RE542

- 4.5" RC hammers model RE543

- 5" RC hammers model PR40

- 5" RC hammers model RE545

- 5.5" RC hammers model PR52

- 5.5" RC hammers model PR54

- 5.5" RC hammers model RE547

- 6" RC hammers model RC6A