1000 Square Meter Prefabricated Ready Made Steel Structure Warehouse Building for Food Factory

1000 Square Meter Prefabricated Ready Made Steel Structure Warehouse Building for Food Factory

Product Description

Steel structure warehouse building are among the most affordable buildings to erect.
As all of the warehouse building materials are prefabricated, there will be no delay at the warehouse site. Each part of the steel frame fix together perfectly, as well as the steel panels as roof and wall cladding. This means it will cost less in labor to install the steel structure warehouse building, and there’s no excess building material to be wasted.

Product Specification

Components of steel structure building:

● Primary Framing Elements
Columns, beams members are made by H section steels( hot rolled section steel/ welded section steel), which will be easily bolted together at site. A factory primer and facing paintings or galvanization surface treatment are applied to get better anti-rusting effect of primary framing elements.
● Secondary Framing Elements
Purlin, tie bar are formed as secondary framing, which will fix on columns and beams by common bolts.
● Bracing
Round steel is supplied with knee bracing and other supporting parts that need portal framing, which will improve the stability and durability of the whole structural hangar.
● Cladding
Roof and Wall are covered by color-coated corrugated steel sheet or steel sandwich panel, hot dipped with zinc and aluminum compound, that is fixed to the outside of structural building to protect it against bad weather or to make it look more attractive and last for generations.
● Windows and Doors
Plastic Steel Window/Aluminum-alloy Window; Sliding Door/Folding Door.
● Other Options:
Gutter, Downpipe, Transparent sheet, Ventilator and Bridge Crane will be fitted according to client’s requirements.

Our raw materials are ordered from one of China's largest steel mills, ensuring quality and timely delivery. With the strategic partnership, we can guarantee the reliability and consistency of the materials used in our products. Moreover, This collaboration allows us to streamline our production process, ensuring that we can meet project deadlines and deliver on time.

Product Advantages

1-Durable and with long lifespan.
2-Short construction period than concrete and wooden building.
3-Low cost and reusable.
4-High strength and light weight, has good seismic performance.
5-Widely used for multi-purpose buildings.

Product Design

Could you tell me your requirement for your steel structure project?

Basic design requirements and design Load,
1. Project site location;
2. Overall dimension (length*width*eave height in meters);
3. Mezzanine or not? How many kgs of load per square meter on mezzanine?;
4. Single-layer steel sheet wall or sandwich panel wall;
5. Snow load if applicable;
6. Wind speed/load;
7. Interior column allowed or not;
8. Overhead crane needed or not, capacity?;
9. Any other particular requirements?

Building Purpose: we will recommend the best design for the purpose of the building.

A. Warehouse/Storage
B. Factory
C. Agriculture Barn
D. Workshop
E. Office Building
F. EXhibition Hall
G. Medical Warehouse
H. Animal Farm (please confirm what kind of animal)

Productive Process

The manufacturing process of a steel structure warehouse involves several key steps. Here are the main points:

1. Cutting

The steel materials are cut using advanced equipment such as laser cutting machines. These machines ensure precise and clean cuts, following the specific dimensions and shapes outlined in the design drawings.

2. Assemble

Skilled workers assemble the cut steel components according to the design specifications. Fourhydraulic positioning systems hold the upperand lower flange plates and webs of h-shaped steel members for positioning.

3. Welding

After assembled, it is hoisted into the gantry type submerged arc automatic welder for welding, and welding shall becarried out according to the specified welding sequence and welding specification parameters.

4. Rust Removal

Shot blasting and derusting of H steel and other shaped steel, welding members and steel plates. shot blasting to Sa2.5.

5. Surface Treatment

After welding, it will be painted or hot-dip galvanized according to customer's requirements.

Product Packaging

Our packaging and transportation methods are customized to meet the specific requirements of each product. Typically, we utilize pallets for packaging, and we also offer the option of bulk shipment, then the goods are loaded directly into shipping containers. These containers will be transported to the port. We follow FOB or CIF trade terms to ensure the safe and timely delivery of goods to our customers.

Project Process

To make a steel construction project is to start with the customer sending us an inquiry, there are several steps:

1. Contact us
Contact us by Phone/Email/WeChat
2. Drawing and Quotation
Tell us what you want, our sales man and designer give you the best proposal for your steel building project.
3. Finalize contract
Finalize details for price,payment,shipment time,and sign the contract.
4. Producing
Start production upon receipt of down payment,the sales follows up the producing progress.
5. Inspection
QC team will make routine inspection in each process,and provide inspection report.
6. Packing&Shipment
Packing all the parts onto the steel rack , load into the shipping container ; contact shipping forwarder and ship to the final port as customer directed.
7. Install
We provide complete installation drawing,or we can send engineer to the site to give the installation guidance.
8. After-sale service
Anytime, any problem, our sales man and engineer will try our best to help your solve it.

FAQ

1. Do you provide on-site installation service?

We can provide Installation guide service based on customers' request.

2. What's your delivery time?

Salesman will confirm the time accordingly, large order should communicate with order management department in advance.Normally, delivery time is 35-50 days after receiving deposit. Large order delivery time should be arranged separately.

3. How to control the quality of your product?

a. quality of the design: think about possible problems in advance and provide a high-quality design solution.
b. quality of the raw material: choose the qualified raw material
c. quality of the production:precise manufacturing technique, experienced workers, strict quality inspection.

4. If there is a clear service life of your products? If have, how long?

Under conventional climate and environment, steel structure whole building 30 years, main structure 30 years, protecting system 15 years.

5. What designs do you have in different climates (How can the products adopt to different climates)?

Strong wind region: improve the wind-resisting ability of the internal structure.

Cold region: increase the thickness of the wall, or use good insulation material, improve the anti-pressure ability of the structure.

High corrosion region: use corrosion resistant material, or paint anticorrosive coating.

• Our Company

Qingdao Xinguangzheng Steel Structure Co., Ltd. was founded in 2002 and is located in Pingdu City, Shandong Province. It covers an area of over 200 acres and has 1000 employees. Its products are sold to more than 100 countries and regions around the world, serving over 10,000 customers. The company was listed on the New Third Board in 2015.

Thanks to years of technical accumulation, the company has obtained engineering design qualifications and established an independent design institute, covering multiple fields such as planning, architecture, structure, electrical and photovoltaic integration, interior design, BIM design, engineering cost and consulting services. It provides full-cycle technical support for project implementation. In the field of technological innovation, it has hosted or participated in the formulation of multiple national and local standards, has received nearly 100 patents, and has been certified as a "National High-tech Enterprise". At the same time, it has deepened collaboration with renowned universities such as Shandong University, Shandong Institute of Architecture, and Yantai University, establishing a stable industry-university-research cooperation mechanism, and jointly working on talent cultivation, scientific research breakthroughs, and product research and development, continuously enhancing its scientific research innovation and technology transfer capabilities.

The company has 12 professional steel structure production lines, and each production line is equipped with advanced domestic equipment such as laser sheet cutting machines, intelligent profile cutting machines, intelligent profile marking machines, welding robots, laser pipe cutting machines, large bending machines, box-type beam automatic production lines, welding H-steel production lines, assembly and welding correction automatic production lines, automatic spraying lines, etc. The annual output can reach 150,000 tons. It has the processing capabilities of light steel, heavy steel, large-span truss steel structures, bridge steel structures, high-rise, super high-rise steel structures, large equipment steel structures, and spatial steel structures.

Xinguangzheng always aims to "become the global leader in steel structure application fields and equipment integration services", with the mission of "benefiting society, achieving employees' success, making customers happier, and making the enterprise more sustainable", and continuously promoting high-quality enterprise development.

• Products And Services We Provide

​Qingdao Xinguangzheng is a leading steel structure building manufacturer in China. Our main hot products are including steel structure warehouses, workshops, factories, plants, office buildings, industrial buildings, commercial buildings, poultry buildings and so on.

• Corporate Vision

Qingdao Xinguangzheng's vision is to build the world's first brand of steel structure whole house system; To build the world's first brand of livestock breeding whole house system.

Our mission is to benefit the society, achieve employees, make customers happier, and make the enterprise more durable.

Our tenet is to take the society as its own responsibility, to the enterprise as the platform, to the team as the core, to improve themselves, create wealth, and our philosophy is to focus on customer satisfaction.

Based on the above, we have been doing our best to provide customers with high quality goods, the best service and the most competitive prices, which is how we win the majority of customers and the market.

• Organizational Structure

​We have a well-trained management team, design team and quality inspection team, can provide customers with the shortest time the need products, arrange your order correctly, strictly control the quality of mass production and delivery time. With the efforts of our entire team, our factory has occupied a certain position in the global market.

• Corporate Advantage

​We have successfully obtained internationally recognized certifications such as CE and ISO 9001, which demonstrate our commitment to quality and adherence to rigorous standards. These certifications validate our comprehensive quality management system and provide assurance to our customers that our steel structures meet the highest industry standards. Through the implementation of these certifications, we ensure that our manufacturing processes, materials, and final products undergo rigorous inspection and adhere to strict quality control measures. This allows us to consistently deliver steel structures of exceptional quality and reliability, instilling confidence in our clients and reinforcing our position as a trusted and reputable provider in the industry.

• Technical Strength

​We have more than 100 professional technicians, using Tekla, AutoCAD, 3D3S, Sketchup and other software, to provide customers with free design services, correct quotation services, rigorous construction drawings, to provide a strong guarantee for our order promotion.

• Corporate Productivity

​The company has six factories, a number of workshops, a number of production lines at the same time to operate, to be able to complete customer orders on time and efficiently. This ensures our timely supply of all orders.