Electric Pur Hot Melt Glue / PUR Hot Melt Glue For Electronics /
PUR Electronics
Product Descriptions:
BJ1015 is a solvent-free,reactive hot-melt polyurethane (HMPUR). It
behaves fast strength built-up and high bonding strength in end,
reworkable for repair.
Applications in Electronics:
PCB Component Fixation – Secures connectors, capacitors, and wires before soldering.
Wire Strain Relief – Prevents cable breakage at solder points.
Enclosure Sealing – Protects sensitive electronics from dust/moisture ingress.
Display & Touch Panel Assembly – Bonds layers without outgassing (unlike silicones).
Battery Pack Assembly – Provides structural support and vibration resistance.
Characteristics:
BJ1015 showed great and balanced adhesion to PC,ABS, glass, metal
and etc.
BJ1015 strength built-up fast, it reaches 1MPa within 20min after
bonded.
High cured strength:BJ1015 after cured showed high strength on PC
and ABS
both in shear and pulling force.
Re-workable:This product after cured can be re-workable by heat it
to certain
temperature,the glue line shows elasticity properties.
Good work ability : BJ1015 can be applied by extruding bead and
spray.
Good thermos-stability: This product showed termo-stability during
long heat,less
15% increase in viscosity after heated at 110C for 6 hours
Specification:
| (Viscosity@150 oC) | 3000±1000cps |
| Appl. Temp | 110℃ |
| Open time @23℃ | 6-8min |
