FPV Video Scrambler Module For Video TX Encryption And RX
Decryption
FPV Video Scrambler Module Key Features:
- The CVBS video stream encryption and decryption module needs to be
used in pairs,one attachs to the FPV transmitter, and the other to
the video receiver
- FPGA digital encryption and decryption processing, with
high-intensity 32-bit password(up to 232)
- During the encryption and decryption processes, the video delay
only increases by less than 1 ms
- Supports PAL and NTSC analog video stream encryption and
decryption, applicable to various flight visual cameras, Thermal
imaging cameras, etc
- Through the setting of the dip switch, the same hardware module can
be used for encryption and decryption operations
- Encryption and decryption passwords can be set through serial port
- Suitable for any FPV VTX, scrambling on the video cable square
layout, suitable for assembly with VTX
- Upgrade FPV security
- Prevent others from viewing your private videos.
Video encryption principle
It collects CVBS video and performs analog to digital conversion,
the converted digital signal is encrypted through FPGA, reprocess
the video image, then output it for digital to analog conversion,
finally convert it into standard CVBS format and output to the
transmitter.
Video decryption principle
The CVBS video signal received by the receiver to do analog to
digital conversion,decrypt the converted digital signal through
FPGA, reprocess the video image, then output it for digital to
analog conversion, finally convert it into standard CVBS output to
the display.
FPV video scrambler and descrambler connection diagram:
FPV Video Scrambler Hardware description
The size of the module is 34.5*34.5mm, the top height is within
3mm,bottom height is within 1mm, board thickness is 1.2mm. The
diameter of the fixing holes on the four corners is 2.5mm. The
weight is 4.3 grams.
Dial switch
To set whether the FPV video scrambler module worked as an
encryption or decryption function module. When the dip switch is
turned to "on" (as shown in the above picture, turned to the left),
it is used as an encryption function module. When the dip switch is
turned to "I" (as shown in the above picture, turned to the right),
it is used as a decryption function module.
The video frame after encryption and decryption processing
Original CVBS video Encrypted video Encrypted and decrypted video
