TDD duplex UAV Video Transmitter With 100km Long Distance Wireless
Data Link
Quick Detail:
- TDD OFDM full duplex wireless UAV video transmitter for video data
link.
- Up to 30Mbps Iperf Throughput @20MHz channel.
- Supports point to point, point to multipoint networks or Mesh
network.
- Interface through web browser or control uart.
- 2 Ethernet and 3 channel uart for Drone/ UAV data link.
- 22km~100km long range video data transmission.
- 2W or 5W RF power output
Description:
HCL536 UAV video transmitter is specifically designed for video
data wireless transmission with two-way wireless data link.It works
at 800MHz or 1.4GHz bands, with frequency hopping technology (FHSS)
to make sure more stable signal transmission.
Specifications:
| TDD duplex UAV Video Transmitter With 100km Long Distance Wireless
Data Link |
| Modulation | TDD OFDM |
| Frequency | 806~826MHz,1428~1468MHz,1420~1530MHz |
| FHSS | Support |
| Bandwidths | 1.4/3/5/10/20MHz |
| Throughput | Maximum 30Mbps at 20MHz bandwidth |
| RF Transmissioin Power | 2W or 5W |
| Constellation | QPSK,16QAM,64QAM self adaption |
| Sensitivity | -108dBm(1Mbps) |
| Ethernet ports | 2 * Ethernet ports |
| Serial ports | 3 channels,3*RS232, 3*TTL or 2*RS232/ TTL+ 1*Sbus |
| Transmission Range | 22~100km (UAV to Ground) |
| Management | Web UI and Control Uart |
| Encryption | AES128 |
| Networking Mode | Point to Point, Point to Multipoint,Relay, Mesh |
| Movement Speed | Support no less than 300km/h |
| Power Input | 12~18V(2W), 24~28V(5W) |
| Power Consumption | <12W(RF Power 2W), <22W(RF Power 5W) |
| Dimensions | 103.4*61.4*22mm |
| Weight | 142g |
Wireless Networking with HCL536:
HCL536 UAV video transmitter supports 2 operate modes: Access Node
or Central Node. It can be managed through web UI.
It supports connecting up to 16 access nodes to a central node.All
the nodes are within the same wireless local area network and share
the entire transmission bandwidth (maximum 30Mbps@20MHz
throughput).
Data from Central Node to Access Node, we call downlink, and data
from Access Node to Central Node, we call uplink. Uplink and
downlink stream ratio can be controlled through web UI.
When using HCL536 UAV video transmitter for Point-to-Point
transmission, uplink and downlink share the whole transmission
bandwidth (maximum 30Mbps@20MHz throughput) too. HCL536 supports
network mode: point to point, point to multipoint, relay, and Mesh
(specify mesh version when place order).
Point to Point network:
Point to Multipoint networking type
Relay networking type
Mesh networking type (Specify)
Application:
FAQ
Q1. It seems to support IP camera, how about I want HDMI or SDI
video intput?
A: Yes, the default video input is IP RJ45 Ethernet port, if your
camera only has HDMI, SDI, AHD or AV output, our mini encoder
device can encode the video and audio signal into digital data for
transmission. For the receiver end, you can connect it directly to
your computer or NVR. If you want output to an HDMI monitor, our
decoder device can help convert the digital data back into HDMI
video and audio signals.
