Self Cleaning Polyurethane Vibrating Sieve Screen Red Color
PU Self-Clean Mesh has high elasticity, high screening efficiency,
good wear resistance performance and wide particle size range. The
installation size can meet the requirements of equipment
installation according to the design of the screen, such as rhombus
hole, corrugation hole, triangle hole and so on.
Polyurethane Screening Systems
Characteristic
Faster screening layering
Screening materials must rely on vibration. It can make coarse
materials to go up and small material sink to the bottom.
When using static screening media, such as woven mesh, polyurethane
or perforated screens, the only thing that can cause vibration is
the screening machine, which usually has an amplitude of 500-1000
times / minute. because all steel wires are independent , the
Anti-clogging Screen can achieve the vibration frequency of
6000-10000 times / minute. So the Anti-clogging screen can speed up
the delamination and let more material pass through the screen.
Higher aperture ratio
The opening rate is the area of the openings through which the
material can passed. Higher opening ratio means higher screening
capacity.
Different types of screens have different opening rates, which will
also affect the quantity of material that each layer of screen
machine can handle. On multi-layer screen machines, the
relationship between the opening ratio of each layer screens and
the size of the material is an important factor that needs to be
balanced.
Through using the best quality wire, we can reduce the wire
diameter of the wire, which means increasing the area of the
openings to improve the screening efficiency, while also ensuring
excellent wear life.
Longer wear life
Our Anti-clogging screen have a longer wear life than woven screen,
and depending on the different application environment, It will
more longer using time than PU and rubber.
Compared with the woven mesh with upward protrusions, the flat
surface of the Anti-clogging screen can 100% use screen surface of
wear life, because all the wires are worn uniformly, so that the
openings can be maintained for a longer time within the specified
specifications. However, due to the slight V-shaped hole design of
the PU screen plate, the opening size will change after a certain
percentage of wear.
Longer wear life not only reduces downtime, but also reduces
maintenance and replacement costs.
