YJJ MP702 0-100PPM Planar Semiconductor Ammonia (NH3) Gas Sensor

Product Description:

YJJ MP702 0-100PPM Planar Semiconductor Ammonia (NH3) Gas Sensor

Features:

MP-702 planar semiconductor ammonia (NH3) gas sensor, with metal packaging, is suitable for detecting ammonia concentrations ranging from 0 to 100 ppm. Its typical applications include ammonia leakage monitoring in refrigerators and cold storages, as well as risk control in aquaculture.

Parameters Sign / Unit Value / Condition Remarks

Detected gas — Air ammonia (NH3) —

Detection range ppm 0 - 100 ppm —

Loop voltage VC ≤ 24 V DC —

Heating voltage VH 5.0 V ± 0.1 V AC/DC —

Load resistance RL Adjustable —

Heating resistance RH 95 Ω ± 10 Ω (at room temperature) —

Heating power consumption PH ≤ 300 mW —

Sensitivity S ≥ 5 (at 50 ppm NH3) S = Rs (air) / Rs (50 ppm NH3)

Concentration slope α ≤ 0.6 α = R100 ppm / R30 ppm NH3

Sensitive body resistance Rs 1 kΩ - 30 kΩ (at 50 ppm NH3) —

Standard test conditions — 20 ℃ ± 2 ℃; 65% ± 5% RH; VC = 5.0 V ± 0.1 V; VH = 5.0 V ± 0.1 V —

Preheating time — ≥ 48 h —

Form / Packaging — Metal packaging, 4 pins 1, 2 pins for heating; 3, 4 pins for measurement

Typical characteristics and usage tips

Working principle: Metal oxide semiconductor gas-sensitive layer, conductivity increases with NH3 concentration, and Rs changes are converted into voltage output through RL.

Response and recovery: Highly sensitive to ammonia, response/recovery is fast, suitable for real-time monitoring.

Environmental impact: Sensitivity is affected by temperature and humidity. Standard test conditions are 20 ℃ / 65% RH; calibration and use should be performed under similar temperature and humidity.

Installation and soldering: Prefer manual soldering; 250 ℃ ≤ 3 s; use the least chlorine-containing rosin flux; avoid volatile silicon substances, corrosive gases, and strong shock and vibration.

Circuit connection and selection tips

Dual voltage supply: VC is the measurement circuit voltage (≤ 24 V DC), VH is the heating voltage (5.0 V AC/DC); connect 1, 2 pins for heating, 3, 4 pins for measurement, they can share the power supply, pay attention to polarity.

RL selection: Convert Rs changes into VRL through RL; RL can be optimized according to the target output range and noise requirements (commonly in the kΩ range).

Long-term storage and aging: Unpowered long-term storage will drift, before use, it is necessary to fully age (1 - 6 months ≥ 72 h; > 6 months ≥ 168 h).

Specifications:

Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, photodiodes, Japan FIGARO, UK CITY, ALPHASENSE full range of semiconductors, catalytic, electrochemical gas sensors, French HUMIREL/MEAS humidity sensors and other international well-known companies authorized agents or distributors, to provide customers with product information, products Solutions, product selection, supply guarantee and logistics services, etc.