1) Construction:
Internal rubber-based tube for hydrocarbons and alcohols,
constructed with multiple textile layers for tensile and torsional
reinforcement. Includes a built-in steel spiral for greater
resistance to twisting. Equipped with a grounding wire for
electrostatic dissipation.
Electrically discontinuous hose.
Working Pressure: Up to 25 bar
Test Pressure: 1.5 times the working pressure
Temperature Range: -20 °C to +82 °C
Safety Factor: 5:1 (Note: "1:5" likely means 5:1 safety factor,
i.e., burst pressure is 5x working pressure)
Vacuum Resistance: 0.7 Bar at room temperature
Ends with ANSI 150lb flanges (fixed and swivel)
2) Characteristics: Airtight, Conductive, Low-temperature
resistant, Ozone resistant.
3) Application: Handling petroleum products containing up to 70%
aromatics at terminals, on ships, and barges.
4) Single foam flotation sleeve to prevent water absorption.
5) High abrasion resistance, easy installation, good adhesion, long
service life, easy assembly.
| ID (mm) | ID (Inches) | Pressure (bar) |
| Flange Material / Standard |
|
|---|
| mm | inches |
| M | Carbon Steel / S304 | ANSI 150lb / 300lb |
| 102 | 4 | 10 | 20 | 3/11 (Note 1) | ANSI 150lb / 300lb |
| 150 | 6 | 10 | 20 | 3/11 | ANSI 150lb / 300lb |
| 200 | 8 | 10 | 20 | 3/11 | ANSI 150lb / 300lb |
| 250 | 10 | 10 | 20 | 3/11 | ANSI 150lb / 300lb |
| 300 | 12 | 10 | 20 | 3/11 | ANSI 150lb / 300lb |
| 400 | 16 (Note 2) | 10 | 20 | 3/11 | ANSI 150lb / 300lb |
| 500 | 20 | 10 | 20 | 3/11 | ANSI 150lb / 300lb |
| 600 | 24 | 10 | 20 | 3/11 | ANSI 150lb / 300lb |
| 800 | 32 (Note 3) | 10 | 20 | 3/11 | ANSI 150lb / 300lb |
| 1000 | 40 (Note 4) | 10 | 20 | 3/11 | ANSI 150lb / 300lb |
Color, dimensions, thickness, pressure, and length can be
customized.
Notes on the Translation
1.3/11: The meaning of "3/11" in the flange material column is
unclear from the context. It might refer to a specific flange
facing (e.g., raised face RF number) or a standard, but this is not
standard notation. It's best to confirm its meaning from the
original source or manufacturer.
2.400 mm ID: 400 mm is closer to 16 inches than 15 inches. The
table lists "15", which might be a specific nominal size label
rather than the exact conversion.
3.800 mm ID: 800 mm is closer to 31.5 inches, but 32 inches is a
common nominal pipe size.
4.1000 mm ID: 1000 mm is closer to 39.37 inches, but 40 inches is a
common nominal size.
5.Pressure Columns: The header for the pressure columns is unclear
("压力", "酒吧", "M"). Based on the values (10 and 20 bar) matching the
working and test pressures mentioned earlier (25 bar max WP * 1.5 =
37.5 bar test, so these values might be for specific sizes or
conditions, or the 25 bar is a maximum, not for all sizes), I've
interpreted them as likely representing Working Pressure and Test
Pressure for these specific sizes, noting they differ from the
general specs. The "M" column header's meaning is unknown.
6.ANSI 150L: Translated to ANSI 150lb (pound rating), which is the
standard designation.
7.Single foam flotation sleeve: This suggests the hose might be
intended for use on water (like for bunkering or offshore loading)
and includes a sleeve to keep it afloat.
8.High abrabisionm: Corrected to "High abrasion resistance".
Key Attributes
| Attribute | Value | Attribute | Value |
|---|
| Place of Origin | Zhongshan, China | Brand | megahose |
| Model Number | JSY-SUCTION | Working Pressure | 10, 20, 30 Bar, etc. |
| Reinforcement | Steel Wire Helix, High-Tensile Cord | Length | 20m or Customized |
| Application | Dewatering, Pumps, Water Management, Dredging | Transport Package | Plastic Bag, Wooden Case or Pallet |
| Specification | 4 inch, 6 inch, 8 inch | Material | NBR, NR |
| Color | Black | Product Name | Oil Suction Hose |
| Function | Suction and Discharge of Oil and Water |
|
