L3 Managed 16-Port 10G SFP + 2-Port 40G QSFP+ Fiber Switch
Advantages
★ ★ High density 10G access, performance is remarkable
1) with 484Gbps backplane capacity, the industry the highest performance (1U TOR);
2) hardware routing, the packet forwarding rate of the wire speed
layer 3 switching has reached 360.092Mpps, L2 / L3 full speed forwarding;
3) 16 10Gb optical ports, 2 40G QSFP+ port, the highest density (1U
TOR), meet the demand of high-density 10G server access.
★ ★ Convenient Maintenance
(1) able to be managed via Web, SNMP,telnet, etc
(2) support XModem protocol, use TFTP/ZMODEM for software upgrading
and BootRom upgrading
(3) support SFP+, simultaneously downward compatible XFP
(4) support flexible port configuration
★ ★ Powerful Flow and Broadcast Management
(1)automatically detect and control broadcast storm, support IGMP
packets detection, effectively limit the flooding of broadcast
packets.
(2)support Ethernet interface taking 1M as the step length for rate
limiting
★ ★ Safe and Reliable
(1)provide DOS, DDOS, spoofing and virus defense
(2)support IEEE802.1x, provide port-based user authentication, network
shield, safety control, and policy control technology
(3)restrict the maximum number of hosts connected with the port,
multi-binding Ethernet interface , increasing bandwidth and system
redundancy
Overview
LNKFS1602 Series is a 10 Gigabit data center switch. Providing 484Gbps switching
capacity, the highest performance (1U TOR) in the industry. With
360.092Mpps forwarding performance, L2/ L3 full wire-speed
forwarding. With the modular design, it provides 16*10G SFP+ optical ports, 2*40G QSFP+ port, 1 Console port, 1
10/100/1000M RJ45 port, 1*OOB port, which offers enough bandwidth for data aggregation and data
exchange. And in order to flexibly respond to the network
requirements, users can select appropriate, 10G ports according to
their needs. 16+2 comes with high bandwidth and low latency, pipe
network, this switch located in density of the next generation of
data center and cloud computing network access, can also be used
for large Internet cafes, the core of enterprise network,
metropolitan area network, or gathering.
Technical Indexes
Product Model | LNK-FS1602HC |
Fixed Port | 16x10G SFP+ optical ports, 2x40G QSFP+ port, 1xConsole port,
1x10/100/1000M RJ45 electrical port, 1xOOB port |
Console Port | 1 |
Backplane bandwidth | 484Gbps |
Packet forwarding rate | 360.092Mpps |
Jumbo Frames | 12k bytes |
Transfer Mode | Support store-forward mode and cut-through mode |
IPv4/IPv6 Route | 512/256 |
Packet Buffer | 4MB |
VLAN ID | 4K |
Flash Memory Capacity | 32M |
Memory capacity | 256MB |
CPU | Single-Core 32-bit 600MHz MIPS |
Software Specification |
System configuration | Systerm setting | View software version, CPU utilization, memory utilization |
Network settings | Configure device management address |
User configuration | Configure user name and password |
Log configuration | View and download logs |
TELNET configuration | TELNET services enable, disable |
HTTPS configuration | HTTP/HTTPS enabled, disabled |
Diagnostic test | PING,TRACEROUTE |
Port configuration | Physical port | Configure port rate, flow control mode, maximum frame length |
Storm suppression | Configure broadcast, unknown multicast, unknown unicast rate |
line rate | Configuration entry, exit rate, burst rate |
Port Mirror | Supports up to 4 groups of images |
Link aggregation | Supports up to 16 sets of static LACP, support dynamic LACP |
Port isolation | Supports up to 8 groups of Uplink, Downlink isolation |
Port Statistics | |
Two-layer configuration | VLAN configuration | Port mode, PVID, tag/untag list configuration, VLAN create |
mac-vlan | |
protocol-vlan | Support based on ETHERII, SNAP, LLC frame type VLAN |
voice-vlan | |
MAC configuration | Static MAC configuration, dynamic MAC query |
MSTP configuration | Support STP, RSTP, MSTP (802.1s) three protocols |
IGMP-snooping | Static multicast configuration |
DHCP-snooping | Support static binding, ARP dynamic detection, IP source address
check |
ERPS-Ring configuration | |
GMRP configuration | |
Cyber security | Access control | Set the access rules for this device |
Anti-attack settings | PING message discard, DOS attack, CPU receive packet rate setting |
ACL settings | Based on MAC and IP ACL configuration, you can configure the ACL to
take effect |
Advanced configuration | QOS settings | Support SP, WRR, DRR scheduling configuration; 8 send queues per port mapping 802.1p 8 priority; Support DSCP queue mapping; |
LLDP settings | |
SNMP settings | Support SNMP v1, v2c, v3 version |
System maintenance | Configuration file management | Configuration file view, upload, download |
Save the configuration | |
Reboot the device | |
Reset | |
Online upgrade | |
Physical characteristics |
Dimension (LxWxH) | 440mm *285mm * 44mm |
Power supply characteristics | AC:90V～290V |
Power | ≤110W |
Indicator light | Power indication, system indication, connection / send and receive
instructions |
Ambient temperature / humidity | Operating temperature: 0 ° C ~ 50 ° C (0m ~ 1800m) Storage
temperature: -40 ° C ~ +70 ° C, relative humidity: 5% RH ~ 95% RH,
non-condensing |
Ordering Information
Model | Description |
|
LNK-FS1602HC | L3 Managed Switch: 16x10G SFP+ optical ports, 2x40G QSFP+ port, 1xConsole port,
1x10/100/1000M RJ45 electrical port, 1xOOB port |
