Plastic ASTM Standard Road Grid Gravel Honeycomb HDPE Geocell for
Retaining Wall Reinforcement Slope Protection Driveway Geocell
Erosion Control
|
| | |
tensile strength of Strip ≥(Mpa) | | |
Tensile strength of weld ≥(N/cm) | | |
Tensile strength of cell edge ≥(N/cm) | | |
Intermediate tensile strength of cell sheet ≥(N/cm) | | |
HDPE Geocell is three dimensional, honeycomb like structures
manufactured from high density polyethylene and jointly welded by
ultrasonic technique. It is flexible to fold during the transport
and installation on construction site.
HDPE geocell nets will be filled with soils, granular, cements or
other on-site infill materials when stretched into web structures,
which has powerful and rigid confinement in the lateral and
vertical sides.
1) Light material, resistant to wear, stable in chemical
properties, anti-aging, resistant to acids and alkalis, applicable
to different soil and desert and other geological conditions.
2)High limit on lateral direction, anti-skidding, anti-deformation,
effectively enhance the supporting ability and scattered load
function of roadbed.
3)High carrying capacity and good dynamic performance and high
erosion ability
4)The geometry size can be changed to meet different needs of the
project, such as height and welding distance.
5)Retractable and small loading volume, convenient joint, speed
construction.
6)Local material can be used during construction, reduce the
construction cost, easy to be transported after folding together.
HDPE Geocell is a lightweight and flexible three-dimensional,
expandable panels made from High Density Polyethylene (HDPE) strips
which are ultrasonically bonded together to form an extremely
strong configuration.2.HDPE Paving Plastic Gravel Stabilizer Geocell Specifications:
1.Cell depth: 50mm , 100mm , 150mm , 200mm , 250mm
2. Welding space: 330mm~1600mm
3. Thickness: 1.0mm , 1.2mm , 1.5mm , 1.8mm
4. HDPE Geocell Appearance: smooth / textured
3.HDPE Paving Plastic Gravel Stabilizer Geocell Features:
1) Light material , resistant to wear , stable in chemical
properties , anti-aging , resistant to acids and alkalis,
applicable to different soil and desert and other geological
conditions .
2)High limit on lateral direction , anti-skidding ,
anti-deformation , effectively enhance the supporting ability and
scattered load function of roadbed .
3)High carrying capacity and good dynamic performance and high
erosion ability .
4)The geometry size can be changed to meet different needs of the
project , such as height and welding distance .
5)Retractable and small loading volume , convenient joint , speed
construction .
6)Local material can be used during construction , reduce the
construction cost , easy to be transported after folding together .
Why HDPE Geocell In roads , railways , sewers and slope applications , etc . during
construction , sometimes we encountersoft and / or weak soils . The
traditional way is to fill with expensive materials , which could
be costlyand time consuming . However , there is an effective
alternative method , by using geocell directly on the subgrade
.geocell is made of ultrasonically-welded high density polythelene
( HDPE ) and can beexpanded to form honeycomb structure . Cells are
then filled with readily available granular materialsand
compacte.The Geocell solution means to challenge soil stability
problems in lots of applications therougn the high-strength network
of interconnected cells .
How HDPE Geocell Works when infilled with compacted materials , it creates a newcomposite
entity that possesses enhanced mechanical andgeotechnical
properties
When the soil contained within a HDPE Geocell is subjected to
pressure , it causes lateral stresses on perimeter cell walls.
The 3D zone of confinement reduces the lateral movement of soil
particles while vertical loading on the contained infill results in
high lateral stress and resistance on the cell-soil interface .
These increase the shear strength of the confined soil . which :
Creates a stiff mattress or slab to distribute the load over a
wider area. Preduces punching of sofl soil.
Incrcascs shear resistance and bcaring capacity
decreases deformation
Confinement from adjacent cells provides additional resistance
against the loaded cell through passiveresistance , while lateral
expansion of the infill is restricted by high hoop strength .
Compaction ismaintained by Geocell resulting in long term
reinforcement
.Applications:HDPE paving plastic gravel stabilizer geocell
1. HDPE Geocell Used for all kinds of road building , driveways ,
soil stabilization and embankment stabilization
2. HDPE Geocell Used to stabilize river embankments .
3. HDPE Geocell Used to prevent landslides .
4. Using HDPE Geocell construction can greatly reduce labor
intensity and reduce the thickness of the roadbed , construction
speed ,good performance and greatly reduce the project cost .
Load Support
Cellular Confinement Systems have been used to improve the
performance of both paved and unpaved roads by reinforcing the soil
in the subgrade-base interface or within the base course. The
effective load distribution of geocell creates a strong,stiff 3D
cellular mattress which can reduce vertical differential settlement
into soft subgrades, improves shear strength, and enhances
load-bearing capacity, while reducing the amount of aggregate
material required to extend the service life of roads.Slope Pretection
The three-dimensional lateral confinement of Cellular Confinement
Systems along with anchoring techniques ensures the long-term
stability of slopes using vegetated topsoil, aggregate or concrete
surfacing
Gruound StabilisationCellular Confinement Systems strengthen the aggregate infill,
thereby simultaneously enabling the use of poorly graded inferior
material for infill as well as reducing the structural support
layer thickness.Typical stabilisation applications include
reinforcement of base and subbase layers in flexible pavements,
including: roads, railway substructure and ballast confinement;
working platforms in intermodal ports; airport runways.
FAQQ:Can you send samples?
A:Yes, we are very happy to provide you with free samples to check
the quality of our products.
Q:Are you a manufacturer or a trading company?
A:Our company located in Hefei,Anhui Province,with are gistered
capital of 52 milion yuan. It is a professional manufacturer of
geomembrane, geotextile, geocell and other products. So we have the
competitive price with best quality.
Q: Can you produce the product according to customers'
requirements?
A: Sure,we are professional manufacturer,OEM and ODM are both
welcome.
Q:How long is the delivery time?
A: General within 3-7days after received the deposit.
Q: How to control product quality?
A: Our factory adopts lean management, products from the beginning
to the end of the production process have strict quality control.
All products must be strictly tested before packing and shipping.Click "Chat now"/"Send inquiry" to contact supplierProfessional geosynthetics manufacturer
Anhui Zhonglu Engineer Materials Co., Ltd
Angela :86-18095658976
