High-Efficiency Automatic Water Softener System
I.Overview
A water softener is a water treatment device used to remove
hardness ions (primarily calcium and magnesium) from water.
Water with excessive hardness is called hard water, which can cause
scaling, pipe blockages, and equipment damage. A water softener
uses ion exchange to absorb calcium and magnesium ions from the
water while releasing sodium ions, thereby reducing the water's
hardness. This treated water is called softened water.
II.Parameters
Parameter | Specification |
Raw water hardness | ≤ 8 mmol/L |
Outlet water hardness | ≤ 0.03 mmol/L |
Working pressure | 0.2 – 0.6 MPa |
Working temperature | 2 – 50 ℃ |
Free chlorine in raw water | ≤ 0.3 mg/L |
Suspended solids | < 5 mg/L |
Iron content in raw water | < 0.3 mg/L |
Flow rate range (optional) | 1 – 100 t/h |
Tank material | FRP / Carbon steel lined with rubber / Stainless steel |
Valve material | High-strength plastic / Copper / Ceramic |
Working voltage | 220V / 380V, 50/60 Hz |
Control mode | Time-based / Flow-based |
Regeneration mode | Co-current / Counter-current |
III.Application
Industrial boilers/hot water boilers: Prevent scale crystallization and extend boiler life.
Air conditioners, heat exchangers, and condensers: Avoid scaling and ensure heat exchange efficiency.
Food, pharmaceutical, and electronics industries: Production processes requiring low-hardness water.
Domestic water: Improve water quality, prevent scale buildup in pipes, and extend
the life of home appliances.
FAQ
1. Q: Which machine should I choose?
A: It depends on your raw water quality and your requirements for
permeate water.
Usually there are three parts: pretreatment, RO machine, and post
treatment. Pretreatment could be UF(ultra filtration)
system,anti-scale dosing system, flocculant dosing system,
disinfectant dosing system, water softener, sand filter, carbon
filter,security filter etc. Post treatment could be UV sterilizer,
Ozonizer, ClO2 sterilizer, etc. And maybe you need an EDI system.
We will choose proper process according to your raw water quality
and permeate water purpose.
2. Q: What’s your machine material?
A: For pretreatment tanks, we usually use FRP or S.S. The RO frame
could be S.S, carbon steel.For pipes, it is usually S.S and UPVC.
We can choose material according to your special requirements.
3. Q: What’s the control method?
A: For pretreatment, you can choose manual or automatic; for the
whole system, we use relay, PLC or man-machine interface remote
controld
4. Q: Which spare parts need to change regularly?
A: Filter cartridge in the security filter and RO membranes. For
filter cartridge, it needs to change each 3-6 months, and for RO
membrane, you need to change each 1-3 years. It depends on your
water quality and how you maintain the machine.
5. Q: What’s your warranty?
A: Our warranty is 1 year. But to our experience, our machine can
work 5 years before repair.
6. Q: What’s your electricity requirement?
A: Our machine could be 380V/220V/110V, 50HZ/60HZ, 3 phase/single
phase. We can do customer made products.
7. Q: What’s your machine size?
A: It depends on the capacity requirement and we can make changes
according to your space.
8. Q: What’s your membrane brand?
A: We have all kind of brand , As guest request .
9. Q: What’s the purchase procedure?
A:Customer send Inquiry -----we provide solution and
quotation-----customer confirm and place order-----we send
PI-----customer make first payment----we arrange
production----customer make the rest payment-----we ship goods from
our factory.
