Wall Mount Active PoE Injector IEEE802.3af/at 15.4W/30W Power
Output
Overview
The wall mount active PoE injector is a compact, plug-and-play
power solution designed
for WLAN access points, IP cameras, and other PoE-enabled devices.
Supporting both
IEEE802.3af (15.4W) and IEEE802.3at (30W) standards, it eliminates
the need for extra
power adapters or cables by delivering power and data through a
single Ethernet cable.
With built-in protection circuits and a space-saving design, it
ensures safe, reliable, and
cost-effective PoE deployments.
Features
Compact Wall Mount Design: Easy installation, saves space in
crowded enclosures.
Dual PoE Standards: Supports IEEE802.3af (15.4W) & IEEE802.3at
(30W).
All-in-One Solution: Integrated power supply—no external adapter
required.
Seamless Data & Power: Combines Ethernet and power in one cable.
Safety First: Over-voltage, over-current, and short-circuit
protection.
Wide Compatibility: Works with 10/100M and Gigabit 10/100/1000M
LAN.
Plug & Play: Simple setup, automatic detection of non-standard
devices.
Technical Indexes
Parameter | Specifications |
Features | • Conforms to IEEE802.3af standard RJ-45 • Conforms to IEEE802.3af standard RJ-45 |
• Data Input Interface RJ-45 10/100Base-TX/ • Data Input Interface RJ-45 10/100/1000Base-TX |
Data Rate | 10/100Mbps 10/100/1000Mbps |
Input Power | 90-240V AC ,50-60Hz |
Output Power | 15.4W Max IEEE802.3af 30W Max IEEE802.3at |
Wiring | • Data provide over pairs 1/2(+) and 3/6(-) |
• Power over spare pairs 4/5(+) and 7/8(-) |
LED Display | YES |
Operating Temperature | 0 to +40°C, |
Humidity | Max. 95% RH(non-condensing) |
Dimension (LxWxH) | 100×48×32mm |
Weight | 120g |
Ordering Information
Model | Decription |
LNK-POE200W | Wall Mount PoE Injector, 10/100Mbps, IEEE 802.3af 15.4W |
LNK-POE200WT | Wall Mount PoE Injector, 10/100Mbps, IEEE 802.3at 30W |
LNK-POE300W | Wall Mount PoE Injector, 10/100/1000Mbps, IEEE 802.3af 15.4W |
LNK-POE300WT | Wall Mount PoE Injector, 10/100/1000Mbps, IEEE 802.3at 30W |
Application
