Manual v-cut machine ,pcb v groove machine ,v cut scoring machine
1. Cutting Width : 1) Longitudinal 70mm ; 2) Wide : 380mm;
2. Thickness : 0.6~2.5 mm;
3. Speed : 12mm / min ;
4. Total Blades : Upper 10pcs ,Down 10pcs;
Operation Rules :
1. V-CUT Aluminum base plate conveying shaft transmission speed
adjustment is 20-30 , The thicker the slow speed transfer plate
,plate thinner speed can be adjustable speed ,Under normal
circumstances , 1.6 of the plate thickness to about 25 speed ;
2. V-CUT aluminum base plate conveying speed of cutter knife shaft
speed . V-CUT ordinary plate can slow speed .
3. V-CUT knife not ordinary plate for v-cut aluminum plate
.aluminum plate with v-cut knife flash can also be used for
ordinary v-cut plate .
4. V-CUT aluminum plate must be used when cooling water ot orcohol
cannot participate in cooling water.
YS-1200 Alum v-cut machine
480 V-CUT aluminum plate cutting machine:
Model No.: YS-1200
Cutting width: 75mm wide vertical 480MM
Thickness: 0.8-3.2 mm
Cardboard each time V≥10 pit (up and down the 10 knives)
Aluminum plate each time V≥ 5 pit (up and down the four knives)
Fiberboard each time V≥ 8 pit (up and down the eight knives)
Speed: 8 m / min.
Spindle Motor: 3KW inverter 3.7KW plastic shaft motor 120W crate
motor 60W closed
Mechanical dimensions: 1200 mm x 980 mm x 1400 mm (W x D x H)
Accessories: washer set, V-CUT knife 4. Shield bearing 10, each one
the size of a wrench, a hex key set,
Blades turret 1
