Smooth And Bright Surface FRP Gelcoat Board Excellent Thermal
Insulation
FRP gelcoat panels are composite panels made from a
fiber-reinforced plastic (FRP) base material, consisting of a
composite of glass fiber and other reinforcing materials with a
resin matrix. A specially formulated gelcoat resin is pre-coated
and cured.
The gelcoat layer is a key component, typically composed of a
mixture of unsaturated polyester gelcoat resin, pigments, and
additives. It is evenly applied to the FRP base surface, typically
with a thickness of 0.2-0.5 mm. This gelcoat not only imparts an
aesthetically pleasing appearance and rich colors to the panel, but
more importantly, provides additional protection for the base
material, enhancing the panel's resistance to weathering,
corrosion, wear, and aging, thereby extending its service life.
Features:
1. Appearance and Decorative Features
Smooth and Glossy Surface: The gel coat layer creates a smooth,
even surface without black spots or bumps, creating a high gloss
and mirror-like finish, significantly enhancing the surface quality
of the sheet.
2. Rich and Long-Lasting Colors: Various pigments can be added to
the gel coat to create sheets in a variety of colors, each with a
pure, unblemished color. The gel coat also offers excellent weather
resistance, effectively resisting UV rays and slowing down gloss
loss, fading, yellowing, and chalking caused by sunlight, heat, and
humidity, ensuring long-lasting color retention.
